Llave para baño de una manija en cromado

Hi Chris, Thank you for your question. The spout on the model 564-SSMPU-DST measures 5-1/8" from the faucet center to the middle of the water stream. Here is a link to the spec sheet. http://www.deltafaucet.com/customersupport/documentation/564-ssmpu-dst.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Hi, Susie! Thank you for your question. The clearance to back splash for the Delta 564-SSMPU-DST Faucet should measure at a minimum of 2 1/2" (64 mm). Best Regards, Rosanna

Hi, Kren! Thank you for your question. The 564-SSMPU-DST will be the same exact make and quality where ever you choose to purchase the faucet at. The Lifetime Limited Warranty is the same regardless of where you choose to buy the faucet. Best Regards, Rosanna

Hi, PJW5! Thank you for your question, and I am sorry to hear that you are experiencing some issues with your Delta faucet. There is an adjustment to be able to make your faucet give hotter water. To do this, remove your handle and you will find the stem of the cartridge assembly. There is a switch on the cartridge located above the stem. Switch this to the left side. This will allow the hottest water. This will not adjust the flow for your hot water, however. For low flow at your hot side, we recommend to flush the supply lines for the flow issue. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you still have issues, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Thank you for your question, Stellar Jay! A DST faucet will never allow water to come into contact with metal and is compliant with current lead legislation. Best regards, Edward

Hello, EML1! Thank you for your question. The tip of the handle is 8 1/8" above the deck surface in the on position. Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/dsp-l-564-mpu-dst_D.pdf Best regards, Jon

Hi RINDY, Thank you for your question. Unfortunately, we do not make another button for the handle. You can remove the button, however, we recommend to keep it in place as it will prevent buildup from forming around the set screw. Best regards, Jon

Hi Wiscplayer, Thank you for your question. The Ashlyn model 564-MPU-DST single handle faucet became available to order on 9/12/2014. You should be able to order this faucet from your local retailer or wholesaler that sells Delta products.

Hello John, Thank you for your question! That is an outlet connector and spout hose as explained the instructions for this model. It is present because of the design and shape of the faucet.

Hi, Woodcrvr! Thank you for your question. The Metal Pop Up Drain Assembly for the Delta 564-RBMPU-DST Faucet includes overflow holes and would recommend to be used in a sink with overflow holes. Best Regards, Rosanna

Hello Toothdoc! Thank you for contacting us at Delta Faucet! I will be happy to help! Please see the link below for installation instructions for the Delta Faucet Ashlyn lavatory faucet model 564-MPU-DST. https://media.deltafaucet.com/MandI/106357%20Rev%20C.pdf Best Regards, Tim

Hello cassg, Thank you for contacting us, I would be happy to help you. Brilliance® finishes, designed to not corrode, tarnish or discolor for a “like-new” look for life, are developed by embedding molecules deep into the faucet’s surface, creating a bond that is virtually indestructible with an incredibly reflective shine. We recommend cleaning the faucet with 50/50 white vinegar and water, this will help get rid of any spots. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Wear! Thank you for your question and we are happy to help. The Delta 564-MPU-DST temperature can be controlled by moving the lever up and to the left or right for hot and cold. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi LuAnne, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. The Delta Faucet Ashlyn® Single Handle Bathroom Faucet In Chrome MODEL#: 564-MPU-DST Escutcheon - 1 Hole Bathroom In Chrome MODEL#: RP77266 can purchase parts online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Debbie, Thanks for your question regarding 564-MPU-DST! I've provided the Technical Specification Sheets of both models below to better assist you. 564-MPU-DST: https://media.deltafaucet.com/SpecSheet/DSP-L-564-MPU-DST%20Rev%20G.pdf 538-MPU-DST: https://media.deltafaucet.com/SpecSheet/DSP-L-538-DST%20Rev%20F.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi LTD55! Thank you for your question! I will be happy to help. Unfortunately the escutcheon is not available as a separate component. However, drain assemblies can be purchased separately. Best Regards, Tim

Hi Dixie, thank you for your interest in the 564-MPU-DST! To remove the handle, pull straight up. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello Edward, Thanks so much for contacting Delta Faucet Company! The Ashlyn® Single Handle Bathroom Faucet Model#: 564-MPU-DST fits 1 or 3-hole 4" installations. This faucet includes a 6-inch deck plate. Please refer to the parts diagram for more details. I have attached the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20E.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Thank you for your question, JTKT! Model 564-SSMPU-DST is in the Brilliance Stainless Steel finish, but is not available in the Spotshield Stainless finish. Best Regards, Benjamin

Hello, Thank you for your question! Unfortunately we do not offer a stainless steel set screw cover that will fit this model. You may be able to locate an aftermarket cover that will fit. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Wear! Thank you for your question and we are happy to help. The Delta 564-RBMPU-DST can adjust water temperature by lifting the handle and moving it to the left or right for hot and cold. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Sylvia, Thanks for your question regarding 564-RBMPU-DST! You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Parts Diagram: https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20E.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Joanne, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Bathroom Faucet In Stainless MODEL#: 564-SSMPU-DST would need the cartridge replaced. Date of manufacturing would determine the correct cartridge that you would purchase. Please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20B.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist

Hi oboeplayer, Thanks so much for contacting Delta Faucet Company about 564-SSMPU-DST! This faucet includes the push pop up and does not have an option for the lift rod. I am sorry for the inconvenience; However, I have included a couple links below to similar models with a lift rod. https://www.deltafaucet.com/bathroom/product/15768LF-SS.html https://www.deltafaucet.com/bathroom/product/555LF-SS.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello, Thank you for your question! Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP101762.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Dr. Mary, Thank you for your question regarding Delta Faucet 564-SSMPU-DST! We apologize for any inconvenience you are experiencing, and we will be happy to help! The Delta Faucet hot/cold indicator is part of the handle, RP101656. We look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hello Laura, Thank you for your question! We are happy to help you. The Delta ASHLYN Single Handle Lavatory Faucet comes with a metal pop-up assembly. It drains by using the lift rod on the back of the spout. Please feel free to contact us back for further assistance. Best Regards, Kelley