TempAssure® 17T Series Shower Trim in Champagne Bronze

Hi, Hobe! Thank you for your question. The rotational limit stop for the Delta T17T253 unit can be adjusted for hotter water. To adjust, Remove the temperature control knob from splines. Rotate temperature control knob clockwise. Place temperature control knob back onto splines and continue to rotate counter-clockwise until maximum desired temperature is achieved. Remove the temperature knob and replace onto the splines, making sure that the temperature knob limit stop hits against the volume handle limit stop. If you should need further assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Thank you for your question. We do one shower arm that reaches longer than the 16" on Delta Faucet model # T17T253. It is model # U6930 and will extend from 13"-22".

Thank you for your question. Delta Faucet model # T17T253 can have a hand held shower added to it. We recommend using the Delta Faucet model R11000 diverter rough with the T11853 diverter trim. There are two hand held showers with this series. Delta Faucet model # 55530 is a wall mount handshower and 57530 is a slide mount handshower that comes with a wall bar. Using either one of those will require a wall elbow which is model 50560.

Thank you for your question. Delta Faucet model # T17T253-SS had a shower arm that is 15-9/32 inches long.

Thank you for your question. All of our shower arms are interchangeable so the Brizo arm will work.

Thank you for your question. Delta Faucet model # T17T253 does have a raincan showerhead that will pivot up or down slightly.

Hi, Danny! Thank you for your question. We do not have a recommended mounting height for the Delta TempAssure T17T253-SS shower head to the valve body as we leave this decision to the end user. Best Regards, Rosanna

Hi, Denilson! Thank you for your question. The Delta TempAssure T17T253 Shower Trim Kit uses the MultiChoice Universal R10000 Rough In Valve Body that has 1/2" outlets and connections. Best Regards, Rosanna

Thank you for your question. Delta Faucet model # T17T253 can have a handheld shower and body sprays added to it. We recommend using the R11000 diverter rough along with the T11953 6-setting 3-port diverter trim. We have a couple of handshowers to recommend. Model 55530 is a wall-mount handshower, and model 57530 is a slide bar handshower. Either handshower will need model 50570 wall elbow. We also can recommend a couple of body sprays. We have an H2Okinetic spray at 1.8 gpm in model 50101 and a 2.0 gpm body spray in model 50150.

Hi Bruce, Thank you for your question. Delta does not make an optional ceiling mounting bracket/ support for this product. Thanks, Dave

Hello Dave7028, Thank you for your question. The drop on the model T17T253-RB shower arm measures 2.09". Best regards, Tanya

Hi, Jerry! Thank you for your question. The Delta T17T253 shower valve trim does have a shower head face that measures 8 21/32" (220 mm). Best Regards, Rosanna

Hi, JA100! Thank you for your question. The temperature handle on the Delta TempAssure T17T253 Shower Trim is metallic. Best Regards, Rosanna

Hello AmandaD, Thank you for your question. We are happy to help! The T17T253-CZ trim kit does not include a drain or drain cap. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello Sally, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included links to our Delta Faucet VERO® TempAssure® 17T Series Shower Trim MODEL#: T17T253-RB matching hand shower and elbow. Please see the links below. https://www.deltafaucet.com/bathroom/product/57530-RB.html https://www.deltafaucet.com/parts/product/50570-RB.html Lastly, you would need a diverter, please see the link below. This diverter would allow you to change from the shower head to hand shower or both. https://www.deltafaucet.com/parts/product/T11853-RB.html Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi Valued Customer, Thank you for contacting Delta Faucet Company! To adjust the temperature to your preference, the unit will need to be in the full-open position. We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Hersh! Thank you for your question. I am happy to help you. The Delta showers do not have a pre-determined height for installing the shower head, you may install it to your desired height. There is no extension kit needed. Best Regards, Antoine

Hi Cmcp, Thank you for your question about the Delta Faucet model T17T253. The included showerhead does tilt and swivel. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Tracy, Thank you for your question. We are happy to help! Yes, the showerhead included in the Delta T17T253 shower trim will pivot.. . Best regards, Bryan

Hello Tommy, Thank you for your question! We apologize for the inconvenience you are experiencing and will be happy to help you. Information on adjusting the temperature for the Delta Thermostatic trim can be found on page 7, step 4 of the Maintenance and Installation manual below. https://media.deltafaucet.com/MandI/68883%20Rev%20I.pdf Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Tom21, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Vero® TempAssure® 17T Series Shower Trim In Chrome MODEL#: T17T253 has a flow rate of 2.5 GPM @ 80 PSI, if you are experiencing low flow then we would recommend flushing and soaking the unit. I have included the flushing instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. Soaking the shower head if any debris has made its way up the shower unit to the head can cause a low flow, please soak the shower head in a 50/50 mixture of white vinegar and water. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Brian, thank you for your interest in the T17T253-RB! The trim can be changed without changing the valve. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello yeags, Thank you for your question! I am happy to help you! Our Delta Faucet VERO® TempAssure® 17T Series Shower Trim MODEL#: T17T253-SS has Soft, rubber Touch-Clean® spray holes that allow you to easily wipe away calcium and lime build-up from the spray face of your shower head and hand shower with the touch of a finger. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole