Llave para cocina de dos manijas con rociador en niquelado pulido

Thank you for your inquiry, Leah! The spout assembly of the Delta Cassidy Kitchen 2497LF faucet is designed to swivel 360 degrees, there is no way to adjust or limit this rotation. Best regards, Tanya

Thank you for your question, gchandler! Model 2497FL-CZ must be installed with the deck plate. This faucet can not be installed without the RP72750 base plate. Best Regards, Benjamin

Hi Trampus, Thank you for your question. To remove the hose on your faucet you will need to press in on the textured portion on the tabs on 2 sides of the white block connector. Once you have applied pressure, push up slightly and then pull the hose down off the fitting. Thanks, Dave

Hi, Pam! Thank you for your question. The aerator is a cache aerator with a metric measurement of M21.5X1-6G and we have an adapter that will converts it to a 55/64"-27 male thread aerator. The model number is RP51505. Best Regards, Rosanna

Hi, Robert. Thank you for your question. There is a retainer and ring that can be replaced if the spout is too loose. The part number is RP73391. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP73391 Best Regards, Rosanna

Thank you for your question. Delta Faucet model # 2497LF-AR has a cache aerator which means it is hidden. We do offer an adapter to turn your aerator into a 55/64" - 27 male thread aerator. The model number is RP51505.

Thank you for your question. Delta Faucet model # 2497LF does have an aerator with a 55/64-27 thread size. We do not manufacture an adapter for a water filter. We recommend checking with the Pur or Brita company to see if they have any adapters they can suggest.

Thank you for your question, Nic! Model 2497LF does not disconnect from the escutcheon plate. Below is a link to our single handle models that we currently offer in which some models will have additional styling options such as a soap dispenser, side sprayer or handle off to the side. https://www.deltafaucet.com/kitchen/sink-faucets/single-handle Best regards, Edward

Hi, Cynthia! Thank you for your question. The Delta 2497LF Faucet base plate is non-removable and the three pieces cannot be used without this part. Best Regards, Rosanna

Thank you for your question, aaaat! The weight of this package in total is 5.56 pounds. Best regards, Edward

Hi Lois, Thank you for your question! The RP51505 adapter will fit the 2497LF faucet. However, I do not have any information on if your portable dishwasher will fit our adapter which has a thread size of female metric 21.5X 1-6 g thread or 55/64”-27 thread. Best regards, Brandis

Hi Steve, Thank you for your questions. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA and Panyu, China. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The back or bottom of the box will tell you where your specific faucet model was made. As our models may be made in different locations depending on available resources, there is not a list saying where each is made. Best regards, Tanya

Dear Jason, Thank you for your question. The Delta Cassidy Kitchen 2497LF faucet, has a Chrome coating finish. Best regards, Tanya

Hi, jgbooth56! Thank you for your question. The 2497LF is made of both metal and non-metal material. Best Regards, Rosanna

Hello Debbiecubs, Thank you for your question. The aerator is a cache aerator with a metric measurement of M21.5X1-6G and we have an adapter that will converts it to a 55/64"-27 male thread aerator. The model number is RP51505. Best regards, Tanya

Hi Frustrated, Thank you for your question. We offer the RP51505 cache aerator adapter that will convert the internal metric threads on your model 2497LF faucet to a standard 55/64"-27 male thread. The swivel aerator will mount to the adapter. http://www.deltafaucet.com/repairparts/details/rp51505.html Thanks, Dave

Hi, Edward! Thank you for your question. The Delta 2497LF Faucet handles can be removed by first removing the buttons from the side of each handle. Unscrew the set screw with a 3/32" Allen wrench. The handles can be removed after the set screw is removed. Best Regards, Rosanna

Thank you for your question, mickeytux! The Delta Lifetime Limited Warranty will cover parts and finishes that prove defective in material or workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for five (5) years from the date of purchase. For further warranty details, please click on the link below. https://www.deltafaucet.com/service-parts/warranty Best regards, Edward

Hi Gene Porter, Thank you for your question. You may also need to flush out the valve body. To flush out the valve body, first turn off the water supply to the faucet. Remove the handles, stem units and seats and springs. Place a pitcher or bucket upside down over the open valve and turn the water back on full strength for 5 to 10 seconds. Do this on both the hot and cold sides. After the allotted time, turn the water off and reinstall the components. Also, make sure that they do not have any dirt or debris on them. Best regards, Tanya

Hello zernos, Thank you for your question. The Delta Cassidy Kitchen 2497LF faucet is designed only with the one 13 15/32" (342mm) spout assembly. Best regards, Tanya

Thank you for your question. Delta Faucet model 2497LF has an aerator that will unscrew to remove it. It can be replaced by ordering RP462827.

Thank you for your question, Lorna! This model currenty includes the RP46827 1.8 GPM aerator. The RP53998 2.2 GPM aerator and RP52216 1.5 GPM aerator will also work with this faucet. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP53998 https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52216 Best regards, Jon

Thank you for your question, Tina! Although this model does not come with cross handles, it uses the RP24096 stem units that will accept cross handles such as the Cassidy handle H295 which can be purchased separately. https://www.deltafaucet.com/parts-product-detail?modelNumber=H295 Best regards, Edward

Thank you for your question, ELME. We do not currently offer the Cassidy Two-Handle Kitchen Faucet without a sprayer assembly. However, you may purchase the RP40301 Quick-Connect Cap separately to cap off the sprayer connection. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP40301 Best regards, Jon

Hi Ron, Thank you for your question. The spout measurement on the faucets is measured from the faucet centers to the center of the water stream. Here are the spec sheets for the model 2497LF-AR and 2480-DSt that will show you this distance. http://www.deltafaucet.com/customersupport/documentation/2497lf-ar.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper http://www.deltafaucet.com/customersupport/documentation/2480-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave

The cashe aerator wrench used for this model used to be RP46858 but has since changed to part number RP52217. This part is designed to clip onto the Pex supply line, however under extreme circumstances needle nose pliers may be used in place of this wrench using a soft cloth to help prevent damaging the aerator. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Best regards, Edward

Hi Lois, Thank you for your question. We have a 72" sprayer hose available for this unit, the RP40308 (GR for gray nut). http://www.deltafaucet.com/repairparts/details/rp40308gr.html Best regards, Jon

Hi, Shoe. Thank you for your question. The Delta 2497LF Faucet spout can be removed by first turning off the water at your shut off valve. Unscrew the bonnet at the base of the spout assembly counterclockwise. The spout assembly can be removed straight up and off. The o-rings and retainer can then be removed and replaced. Best Regards, Rosanna

Thank you for your question, Justin! Crystal knob handles can not be used with model 2497LF. The only handles that can be used with this faucet are the RP72749 handles, which are the ones included with the faucet. Best Regards, Benjamin

Hi CH! Thank you for your question. The baseplate on the faucet, 2497LF-AR, is not a removable. Best Regards, Rosanna