Llave para cocina extensible de una manija con tecnologías Touch₂O® y ShieldSpray® en Venetian Bronze

Hi, Dave! Thank you for your question. The Delta 9197T-RB-DST Faucet sprayer assembly does not have a replaceable aerator assembly. If an aerator is needed, we recommend replacing the whole sprayer assembly. The sprayer assembly is part number RP72680RB or RP90839RB with ShieldSpray Technology Spray Setting. Here are links to the RP72680RB sprayer: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP72680RB Best Regards, Rosanna

Hi, JCSmith, Thank you for your question and I’m sorry to hear you are experiencing low flow with your Delta Faucet. The low flow you are describing is most likely the result of debris in your supply lines or faucet. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you need further help with this process, please contact us directly and we can walk you through the procedure. We are available at 800-345-3358 (prompt 2, then 3), Monday through Friday, 8am to 8pm and Saturday, 9am to 6pm CST. Best Regards, Rosanna

Hi JP, Thank you for your question. When the handle on the model 9197T-AR-DST is pulled down toward you the water temperature should get hotter. Thanks, Dave

Technical specification documentation says that this faucet can be wired with a transformer (rp73954). However, none of the documentation says how to hook it in.

Thank you for your question, David! The 9197T-CZ-DST has an optional matching escutcheon plate, RP71545CZ that will fill three holes. Since this model has a pull down wand, it will not allow for a separate sprayer and would work with a soap dispenser off to the side. Otherwise, the RP3816 Hole Cover is the only cover that we make and unfortunately it is not available in Champagne Bronze. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP71545CZ Best regards, Edward

Hi, Joyjes! Thank you for your question. We do have a few kitchen faucets in our White finish. Here is a list for our White finish kitchen faucets: 470-WH-DST 440-WH-DST 441-WH-DST 340-WH-DST 141-WH-DST If you should have any questions about any faucet, please contact us back. Best Regards, Rosanna

Hi Lightnin, Thank you for your question. The water volume on the model 9197T-AR-DST is controlled by pulling the handle motion to the right with closer to vertical being low flow and increasing as the handle moves to the right. Thanks, Dave

Thank you for your inquiry, Hek9874! The RP90839 wand-sprayer assembly of the Delta Cassidy Pull-Down Kitchen 9197T-DST kitchen faucet, already comes with the ShieldSpray feature. https://media.deltafaucet.com/PartsDiagram/DPD-K-9197T-DST.pdf Best regards, Tanya

Hi Karen, Thank you for your question. If you remove the cap from the battery box while the water is running, the faucet will be in manual mode. This will prevent the 4 minute automatic shut-off. Best regards, Jon

Thank you for your question. Delta Faucet model # 9197T-AR-DST can be mounted on the left but your hot and cold handle will be reversed.

Hi, MT Richmond! Thank you for your question. The Delta 9197T-AR-DST Faucet handle can be left in the 'on' position. This will not drain the batteries or put a strain on the faucet. Best Regards, Rosanna

Dear Asker Coder16, Thank you for your question, I will be happy to help you with this. I have reached out to you via personal email to assist you. Best Regards, Samantha Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com

Thank you for your question. Delta Faucet model # 9197T-DST is available for purchase now but it is not shipping from our plants until September 7, 2012.

Good question, Mat, but you should be in luck! Although the installation might be marginally more difficult under the sink from the reduced clearance, it should work fine. This model features the Euro-Motion handle which only rotates forward to eliminate backsplash interference.

Hi H. Speyer, Thank you for your question! Polished Nickel is a Brilliance finish, which is applied by PVD. https://www.deltafaucet.com/service-parts/faq/faq-tablist-area/tabularlist/other/faq-item-15#answer-c7b01a1a-1844-47d1-a6ad-00871999e26d Here's a link to our guide for cleaning and care. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Regards, Jon

Thank you for your question, JCR1! The part number for the replacement solenoid is going to depend on which solenoid you currently have, and when the faucet was first installed. Any 9197T-DST, that was purchased and installed prior to January 2018 is going to take an EP74855 solenoid. The numbers off the white sticker on the solenoid, will also tell you which replacement you would need. If the white sticker has numbers X00074950, you would need an EP74855 solenoid assembly. If the white sticker has numbers X00090218, you would need EP92546. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin

Hello Smitty, Thank you for your question. A solid red light on your Delta Cassidy Kitchen Pull-Down 9197T-DST faucet, usually means that the solenoid valve is open, water temperature is greater than 110°F (43°C).The red, flashing light means the batteries need to be replaced at the battery pack. Best regards, Tanya

Thank you for your question. Our touch faucets are recommended to be used with alkaline batteries for the longest life. They will usually last 1-2 years depending on the use of the faucet. There is not a way to hardwire the faucet into a transformer.

Hi, Lee1953! Thank you for your question. I am sorry to hear that you are experiencing an issue with your faucet. The magnet kit is available for the Delta 9197T-DST faucet. The magnet kit is RP80977. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP80977 Best Regards, Rosanna

Hi Patricia, Thank you for your question. Yes, this faucet can be used with the adapter only, but we advise keeping the batteries attached for back-up. Best regards, Tanya

Hi, Nate! Thank you for your question. We recommend the whole size for this faucet to be 3X 1 1/4"to 1 1/2" (32 mm to 38 mm) Hole Size. Here is a link to the technical specifications for this faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9197T-DST%20Rev%20D.pdf Best Regards, Rosanna

Yes. I would have given you a specific supplier and address if I knew your location, but you may also easily find the Cassidy available online at Amazon, FaucetDirect.com and others. Go to the 'Where to Buy' tab at Delta Faucet for many other authorized suppliers

Hi Philip, Thank you for your question! Below is a link to the owners manual for the 9197T-AR-DST: http://www.deltafaucet.com/customersupport/documentation/9197t-ar-dst.html?document=mi&fromDetailArea=kitchen&documentIndex=0#flashWrapper Best regards, Brandis

Hi, Frostbeard! Thank you for your question. There is a limit stop on the valve cartridge assembly, located under the handle, that can be adjusted for hotter water. The diagram and directions for this can be seen on page 8, here: https://media.deltafaucet.com/MandI/X00080320_C.pdf Here are the written directions: Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold” to “mixed hot/cold”). The handle limit stop can be adjusted by the homeowner once the faucet is installed. Setting the handle limit stop in position 2 may help to prevent scalding because it limits the amount of hot water in the mix; however, this handle limit stop will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes. To change positions of the handle limit stop: remove the handle; move the valve stem to the all cold position so the water is on; change the position of the handle limit stop; turn off the water; reinstall the handle. Best Regards, Rosanna

Hi, Barb99! Thank you for your question. The 9197T-DST is a Touch2O® Technology faucet. OurTouch2O.xt® Technology Proximity feature is only available on some of our Lavatory faucets at this time. Our apologies for this confusion. Best Regards, Rosanna

Dear Meredith, Thank you for your inquiry! Yes, the Delta Cassidy Kitchen Pull-Down 9197T-DST faucet can be used as a regular faucet. You would simply remove the batteries from the faucet, while it is running or completely remove the solenoid and battery box assemblies and connect the faucet as standard pull-down faucet. Please review "Manual Bypass" section on page 44 of the below document, for diagram instructions. https://media.deltafaucet.com/QuickstartDiagram/QS-82180%20Rev%20E.pdf Best regards, Tanya

Thank you for your question. Delta Faucet model # 9197T-DST has to have a minimum clearance to the backsplash of 2 1/2 inches. If you using a single hole mount, you can rotate the faucet so that the handle is in the front to avoid the handle hitting the backsplash. However, your hot and cold will then be side to side instead of back to front.

Thank you for your question, Don20! The only time a Delta Touch20 Faucet indicator will blink red three consecutive times is if the battery power is getting low. Please be sure all batteries are brand new, inserted in the correct direction, and that no wires are touching anything metallic, electronic or each other. We also only recommend Alkaline batteries as Lithium Ion batteries will not last as long. Please contact us directly if you need further assistance with this model and we'd be glad to help. Best regards, Edward

Hello MS, Thanks for your question. Unfortunately, the spray head assembly that comes with the faucet is the only one that will fit properly. Best Regards, Justin

Dear Annette, Thank you for your inquiry! The RP71545AR is the escutcheon plate in Arctic Stainless finish for the Delta Cassidy Touch2O Technology Kitchen 9197T-AR-DST faucet model. https://media.deltafaucet.com/PartsDiagram/DPD-K-9197T-DST.pdf Best regards, Tanya