Llave para barra/preparación de alimentos extensible de una manija en cromado

N.º de modelo: 9978-DST
Llave para barra/preparación de alimentos extensible de una manija en cromado
N.º de modelo: 9978-DST
Precio de lista: $51465
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 2 orificios de 4"
  • Cumplimiento con la ADA
  • La salida de la tina deslizable y de arco elevado gira 360°
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Instalación con 2 orificios de 4"
Instalación con 2 orificios de 4"
Overall Height (in.) :
14
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-Master-RP44651

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $74.90 - $106.65

RP44651

Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $27.10
Precio en línea: $20.64
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP50813

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $56.30 - $87.45
Free Ground Shipping All Orders $49+

RP50813

Image-RP63265

Delta®

Delta® Adaptador - Junta deslizable

Precio de lista: $53.95
Precio en línea: $41.12
Free Ground Shipping All Orders $49+

RP63265

Image-Master-RP54537

Leland®

Leland® Conjunto de tubo de salida

Precio de lista: $114.10 - $227.80
Free Ground Shipping All Orders $49+

RP54537

Image-RP63264

Delta®

Delta® Kit de adaptadores - Compresión PEX (10)

Precio de lista: $85.60
Precio en línea: $65.20
Free Ground Shipping All Orders $49+

RP63264

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.65
Precio en línea: $5.84
Free Ground Shipping All Orders $49+

RP21945

3.00 1
Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $41.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP46748CZ

Leland®

Leland® Handle and Button

Precio de lista: $55.25 - $102.20
Free Ground Shipping All Orders $49+

RP46748CZ

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $64.35
Precio en línea: $49.04
Free Ground Shipping All Orders $49+

RP80977

3.35 34
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $22.45
Precio en línea: $17.12
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-Master-RP51480

Leland®

Leland® Conjunto de rociador - Extensible (cocina)

Precio de lista: $113.45 - $272.80
Free Ground Shipping All Orders $49+

RP51480

Image-RP47030

Leland®

Leland® Llave inglesa de baño

Precio de lista: $9.20
Precio en línea: $7.00
Free Ground Shipping All Orders $49+

RP47030

1.00 2
Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

Precio de lista: $100.15
Precio en línea: $76.32
Free Ground Shipping All Orders $49+

RP50390

3.96 27
Image-RP51503

Delta®

Delta® Tuerca de bonete con sello de válvula

Precio de lista: $32.35
Precio en línea: $24.64
Free Ground Shipping All Orders $49+

RP51503

5.00 3
Image-Master-RP51481

Leland®

Leland® Conjunto de manguito de válvula

Precio de lista: $62.05 - $103.50
Free Ground Shipping All Orders $49+

RP51481

RESEÑAS
Rated 5 out of 5 by from GREAT PRODUCT, EXCEPTIONAL exceptional PRODUCT. The local plumbing shop had it less than anywhere. Just installed this and am overjoyed with the function and easy of use,
Date published: 2025-03-24
Rated 1 out of 5 by from Poor design and engineering Will not output hot water. Internal mechanism is broken and will only supply cold water.
Date published: 2024-12-22
Rated 2 out of 5 by from Started dripping within months Had a plumber purchase and install this faucet. It was ok for a few months and then started dripping. After reading some of these reviews I’m thinking I need to replace the cartridge, but I kept thinking it was too soon. I should still be under warranty but the plumber disposed of the packaging. Is there anywhere else to find this information?
Date published: 2024-06-26
Rated 3 out of 5 by from Looks great ….not happy with the diamond cartridge I've hd this installed when i had a granite top installed about 5 years ago still looks great. Not very pleased with the “diamond cartridge” i had to replace it twice, this time will be #3 . The first time it leaked into,the sink, the second time under the sink and onto the floor which had to be replaced…..in their defense they did send me a replacement cartridge free of charge. Now it is leaking again. Not sure what to do this time.
Date published: 2024-04-26
Rated 1 out of 5 by from A startling decline in quality My previous Leland lasted from 2008 until August of 2021 when the aerator began to deteriorate. Because at some point they changed the design of the Leland, I wound up having to get an entirely new faucet which Delta provided under warranty. I had to get this installed at considerable expense, and exactly 1 year later (08/22) I had to have them send me a new cartridge under warranty because it wouldn't close completely and it leaked. It is now 3/1/24 and it's leaking again, and will need its third cartridge in 3 years. Keep in mind my original made it 12 years on one cartridge. Furthermore, the old Leland used a mechanical clip to retain the sprayer head, but the new one uses a magnet. That magnet failed almost immediately and now the sprayer head just hangs. Overall I am incredibly disappointed in the nosedive in quality that Delta has apparently taken. This is also a $650 faucet, not the $59 Lowe's builder special, which makes this dismal quality all that more unacceptable. Do better, Delta.
Date published: 2024-03-02
Rated 1 out of 5 by from 2nd one and also JUNK!!! The second Leland and it's JUNK just like the first oneIt is very difficult to get this faucet in the exact position where it doesn't drip. There are many reviews saying the same, and I am frankly baffled that there are so many 5 star reviews as well. Delta's response is to engage in a lengthy process to flush out the hot and cold lines. I had this faucet for about 9 months and finally threw it out. The faucet I replaced it with requires no such flushing and easily turns off without drips. In my opinion this faucet design is defective and should not be sold.  Bought the 9178 DST it has very little water flow from it . All water lines were flushed. I would never recommend this faucet to anyone. e to hire my plumber to replace. To date, I will have spent too much time and effort phoning Delta and almost as much on my plumber as I have these faucets. Although I love the look, I can't afford to use Delta products ever again. So disappointed.
Date published: 2024-01-30
Rated 5 out of 5 by from solid faucet no complaints good pressure and temp select, install was easy with included wrench. magnet failed within 6mos, but delta sent replacement magnets and it's been 3yrs no issues. cleaned out both screens once a year (not hard water) had some problems with dripping bit tightened up the bolt behind sprayer and not an issue. can't take apart sprayer head with wrench...way too hard as there's a slight leak from bottom (separate from the stream or sprayer) and I bet a clean out would help, but it's stuck and included wrench with teeth cams out before i can loosen it...very minor beef after 3 yeara. LOVE THAT LASER STREAM!
Date published: 2024-01-22
Rated 5 out of 5 by from LOVE THIS FAUCET 😍 We've only ever purchased faucets from Amazon and box stores like home depot, only to have them fall apart within a year, at the most. This time, at the suggestion of friends who are contractors, we purchased our delta faucet from a local contractors warehouse. It was considerably more than the diy home improvement boxstores for the seemingly same product. But the quality of the overall weight, metal and other components is far superior and worth the price. Apparently manufacturers use a different grade of metals for faucets sold through an actual contractor's store versus the box stores even though on the surface they look the same. I have to say, even though I balked at this initially, and cringed at the price difference for what looked to be the same item, there's absolutely no comparison. I'll never go back to Amazon or the box stores for another faucet again. We had purchased the Delta Leland model #9178ARDST, Clos to 3 years ago and I absolutely love it and have not had a single problem with it falling apart or any other mechanical issues
Date published: 2024-01-08
  • y_2025, m_5, d_29, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_459
  • loc_en_US, sid_9978-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Regarding handle placement and the meaning of 'front' If I'm standing at the sink, is front closer to me and under the spout? Installing on an island where clearance is not a factor, can the handle be in the back, opposite the sink side?

Asked by: lhlin
Thank you for your question, LHLIN! The handle placement in "front" would refer to being under the spout and closest to the user. For an installation where clearance does not matter, you can install this model with the handle facing to the back since the spout swivels 360 degrees. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

installation on a mica countertop w/farm sink

How far back from a farm sink would be a safe installation for this faucet on brand new mica counter tops?
Asked by: new kitchen
new kitchen, Thank you for your question. The spout extends 9 1/4" from the center of the faucet to the center of the aerator and we advise to allow 2 1/2" clearance to the backsplash. However, it is up to you to decide where to install the faucet in your installation. Please refer to the Technical Specifications for more measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Does the leland arctic stainless 978-ARWE-DST come with a soap dispenser?

Asked by: Philippa
Thank you for your question, Philippa! Model 978-ARWE-DST does not include a soap dispenser. The Leland dispenser can be purchased separately as part number RP50813AR. https://www.deltafaucet.com/kitchen/product/RP50813AR Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does this have to be mounted 4" apart or is 5 or 6" possible?

Asked by: Mary
Dear Mary, Thank you for your question. The Delta Leland Kitchen faucet 978-WE-DST model has the 4" installation requirement for the outstanding reach of the 59" hose assembly. Installing the the handle and faucet 5" or 6" apart would effect the reach of the hose assembly. Best regards, Tanya
Answered by: Tanya
Date published: 2019-02-24

We will have Frigidaire's Gallery series stainless steel appliances in our kitchen. Will Delta's Arctic Stainless or Spotshield Stainless finish match better?

Asked by: agolin
Hi Agolin, Thank you for your question. There is a slight difference between the Delta Faucet SpotShield Stainless Steel finish and the Arctic Stainless finish. The SpotShield Stainless Steel has a spot-resistant neutral, low-gloss finish. The Arctic Stainless has a blue tint to it and more closely matches stainless steel appliances out in the market today. It is only used in the kitchen. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Our faucet is almost 10 years old, and it is hard to keep the faucet from dripping.  We have to try a few times and get the on/off mechanism in just the right place for the dripping to stop.  What kind of repair might this faucet need?  Thanks in advance.

Asked by: MLyons
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-29

Venetian Bronze Color

Does the Venetian Bronze faucet coordinate with oil rubbed bronze cabinet hardware?
Asked by: Sophie
Hello Sophie, Thanks for your question! It's always a good idea to take the cabinet hardware and other accessories to a Delta Faucet showroom to see if your chosen hardware will match the faucet and vice versa. The color of the hardware will ultimately depend on the manufacturer, so we couldn't say if it would definitely match. However, Venetian Bronze would probably match an oil rubbed bronze finish, but whether or not it looks good together is ultimately up to you. I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

what is difference between 9978 model and 978 model?

I need the Leland single hand pull down faucet (2 holes) in the brilliant stainless. I've seen both the 978 model as well as 9978...are these different?
Asked by: WWA
Hello WWA, Thank you for your question! The 9978-DST is a bar/prep faucet generally used in smaller side sinks. As a result, the faucet itself is much smaller than the 978-DST, which is the regular kitchen sink faucet. You can take a look at each faucet's Technical Specifications for further details. I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

Does this faucet have any lead in it?

Asked by: Aimee
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. Delta Faucet Company products that carry the Prop 65 label pictured above include components made with brass, which contains small but detectable amounts of lead—an element included on the Prop 65 chemical list. Brass has a decades-long history of successful use in plumbing applications. Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation, use or removal of any of our products. With DST models, the water does not come in contact with the outer shell of the faucet. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

I bought this through amazon and the aerator is 1.8 gpm, we don't have any local code restrictions and I would like to find a 2.2 gpm aerator that would fit this . Someone (from delta) recommended Delta RP53998 2.2 Gpm Aerator, Chrome. This was to big

Asked by: Sharon
Thank you for your question, Sharon! I apologize for the confusion with this part and we are happy to help. The aerator RP53998 is not meant for the new Spotshield wand that now comes with this model. We do offer a 2.2 gpm aerator with the correct thread size for your wand as part number RP46827. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46827 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

We are buying Beverage Faucet 1914-SS-DST and a Leland 9178-nn-DST for the same sink. It comes in -SP- Spotless and -AR-Arctic. Which looks most like the -SS- beverage faucet? We have brushed nickel everywhere else.

Asked by: DavidB
Thank you for your question, DavidB! SpotShield Stainless will match the Stainless Steel finish. Artcic Stainless features a cooler color temperature than the warmer Stainless Steel. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

I read most of the answers to the questions. If the handle assembly is metal, what material is inside ? Is this product considered a middle quality

or is this still low - end quality? How much price range do I set to look for a middle quality for single handle pull down/pull out kitchen faucet? How often do I change the washer? I didn't buy this yet. I am checking your homepage to see which one I would like to buy.
Asked by: haru chan
Hello Haru Chan, Thank you for your questions. The internal cartridge for this faucet is manufactured with plastic, but it is a high quality of plastic. The rest of the material this Delta faucet is made with is also of high quality material. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-10-31

Can I get this faucet before Dec 15th?

I have 2 of these faucets on order but I'm trying to get my house finished before Christmas. Is there anyway I can get these early. Thanks
Asked by: Desperately seeking faucet
Hi Desperately seeking faucet, Thank you for your question. Unfortunately since the model 9678-AR-DST is a new product launch the product is not scheduled to ship before 12/15/2014. There is no way to get the product earlier. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

everywhere online sells this for $179.But on your site & at my local K&B stores it is priced at $385.20? That's a HUGE difference in price! Are there two versions of this product out there? Does the cheaper price mean lesser quality?

Asked by: lefty
Hi Lefty, We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. The website shows the product at list price. Dealers purchase the product in bulk for selling it readily to consumers, so they are able to offer a much lower price. However, the quality of all Delta faucets are the same. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

can i purchase the pull down bar without the faucet

Asked by: rossi
Hi Rossi, Thank you for your question! The Spout body area can not be purchased separately from the valve control area. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

How can I clean inside the spray? Once a contractor used a special very small wrench to do it. Thanks

Asked by: LiliChi
Hi, LiliChi! Thank you for your question. The Delta 9178-SP-DST faucet does have a sprayer assembly with a removable aerator that can be removed with an aerator wrench. The kit is RP50815. Here is a link to this aerator and aerator wrench kit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the distance through air from the edge of the sprayer to the friction spacer when the faucet is fully retracted?

Asked by: Renee
Thank you for your question. We had one on display and I measured it. With the hose fully extended, you will have 21 inches of hose exposed.
Answered by: Delta1
Date published: 2024-03-28

Is it possible to increase GPM?

model: Leland 978-RB-DST I saw a response about increasing the GPM from 1.8 to 2.2 but the model # in the response could not be found when I searched for it. The response was RP514780RB, but is it really RP51480RB? Is replacing that part all that is needed? Is there a need to replace the O ring as well? I want to order a new faucet and will have it professionally installed, so want to be sure i order all the necessary parts. Thank you!
Asked by: MLK
Thank you for your question. The model number for the 2.2 gpm wand is RP51480RB. You will not need any extra orings to replace this wand. The wands will just need to be switched.
Answered by: Delta
Date published: 2024-03-28

Why is your list price $404.50 for Delta faucet Leland Model # 9178-ar-dst and And Amazon list price is $208.00 for the same model

Asked by: Rich
Hi, Rich! We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Delta retail dealers usually sell faucets that include the handles in the boxes. Plumbing professionals and Delta Studio Showrooms sell faucets where the faucets and handles are packaged and sold separately ("LHP" models), giving the customer some additional styling choices. However, the quality of all Delta faucets is the same. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How long is the pull down hose on this faucet?

Asked by: Mandy
Hi Mandy, Thank you for your question! The hose assembly for the model 9978-AR-DST is 54" long. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does the soap dispenser fill from the top or from underneath the cabinet?

Asked by: karla
Hi Karla, Thank you for your question! All of our soap dispensers can be filled from the top using our RP30395 vented funnel. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Really 2.5" min clearance to backsplash (4" high)? Want to replace a Moen Aberdeen with your Leland 978-DST. The Moen fits fine with 2" clearance from faucet midpoint to backsplash. Why can't I use 978-DST with same 2" center to backsplash clearance?

Asked by: KevinK
Hi, KevinK! Thank you for your question. We recommend the 2.5" clearance to backsplash for the 978-DST so that everything fits on the top of the sink as well as underneath the sink. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

What is the circumference of the base of this faucet? I'm trying to figure out if there is enough clearance from my backsplash.

Asked by: Mike
Hi Mike, Thank you for your question. The recommended clearance to the backsplash is 2 1/2" from the center of the installation hole. The base of the faucet is 2 39/64" in diameter. Here is a link to the Technical Specifications for these and other measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20C.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-27

what do the initials mean following model # e.g. 9678 sp-dst or 9678 ar dst

Asked by: maximillion
Hi, Maximillion! Thank you for your question. The 'SP' in the model Delta 9478-SP-DST faucet indicates the finish for the faucet is SpotShield Stainless. 'AR' indicates Arctic Stainless. The 'DST' stands for 'Diamond Seal Technology'. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does the Model # 9178-AR-DST come with a cover/escutcheon?

I see where a previous questioner was told that the stainless steel (SS) model comes with an escutcheon. But, does the Arctic Steel as well? I read a review of the Model # 9178-AR-DST on an authorized retailer's site that complained that their AR did NOT come with the escutcheon, which I believe is a cover that sits at the base of the faucet, to cover any additional holes used by a previously-installed faucet. The photograph of the faucet does NOT show such a cover. Thank you!
Asked by: Stuart
Yes, it does! I asked that question before I purchased mine and verified it at the store at the time of purchase.
Answered by: John605
Date published: 2024-03-28

What is the warranty on this faucet

Asked by: Tina
Hi Tina, Thank you for your question! Our faucets have a Lifetime Limited Warranty on parts and finish. Please click the link below for more information about our warranty. https://www.deltafaucet.com/service-parts/warranty Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-04-25

Can I buy just the base ring?

Asked by: Lee S
Thank you for your question, Lee S! The Trim Ring for a single-hole installation is part number RP52610. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52610 Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

How tall is this? Why aren't the dimensions listed on the specs tab?

Asked by: TJTJ
Hi, TJTJ! Thank you for your question. The Delta 9678-DST is 14 1/2" tall. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How far does the handle push back?

We are installing this in a small bar area. The faucet will sit fairly close to the wall. I want to make sure that we'll be able to fully adjust the water temperature without the handle hitting the wall behind it. Thanks.
Asked by: dinomomma
Hi dinomomma, Thank you for your question. The recommended minimum clearance to the backsplash/wall for model 9678-AR-DST is 2-1/2" from the faucet center/center of mounting hole to the wall. The handle at max hot temperature only extends approximately 1/2" past the base of the faucet. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Could you use this in a sink with 3 holes and purchase a soap dispenser for the 3rd hole ?

Asked by: Jill
Hi Jill, Thank you for your question. You can purchase a soap dispenser to fill the 3rd hole. Our RP50813RB soap dispenser coordinates with the Leland faucet collection. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28
  • y_2025, m_5, d_29, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_4, bvpage2n
  • co_hasquestionsanswers, tq_550
  • loc_en_US, sid_9978-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 43ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.