Delta®

Conjunto interior universal MultiChoice® para tina/ducha - Engarce PEX

N.º de modelo: R10000-PX
Delta®
Conjunto interior universal MultiChoice® para tina/ducha - Engarce PEX
N.º de modelo: R10000-PX
Precio de lista: $7095
CARACTERÍSTICAS DEL PRODUCTO
Este juego de tubería interna puede instalarse antes de elegir la terminación y el acabado específicos. Permite continuar sin demoras con la construcción o con un proyecto de renovación al delimitar un estilo de diseño. El juego de accesorios se vende por separado y se requiere para completar la unidad. Ahorre tiempo, esfuerzo y dinero en futuras actualizaciones por renovación porque no es necesario modificar la plomería detrás de la pared.
  • Cuerpo de válvula universal MultiChoice® únicamente
  • Acepta cartucho simple, doble o termostático doble
  • El cartucho se envía con los accesorios
  • Capacidad de instalación dorso contra dorso
  • El modelo debe pedirse en una caja completa de 12 unidades.
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Technology and Special Features
Documentos y especificaciones
Información de instalación
Altura total:
4
Voltaje:
0
Tipo de válvula:
Cuerpo de válvula únicamente

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP83888

Delta®

Delta® Soporte - Válvula universal MultiChoice®

Precio de lista: $18.55
Precio en línea: $14.84
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP83888

3.00 2
Image-RP22734

Delta®

Delta® Bonete

Precio de lista: $14.75
Precio en línea: $11.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP22734

4.45 11
Discontinuado
Discontinuado
Image-RP46075
Discontinuado

Delta®

Delta® Protector de enlucido

Precio de lista: $5.40
Acabados estándar

RP46075

Discontinuado
Discontinuado
Image-RP46076
Discontinuado

Delta®

Delta® Cubierta para protector de enlucido

Precio de lista: $3.40
Acabados estándar

RP46076

Image-RP46077

Delta®

Delta® Rejilla para residuos

Precio de lista: $8.25
Precio en línea: $6.60
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46077

Image-RP46078

Delta®

Delta® Tapón de prueba de presión

Precio de lista: $10.30
Precio en línea: $8.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46078

Image-RP47202

Delta®

Delta® Accesorio de instalación de válvula universal MultiChoice® para paredes delgadas

Precio de lista: $14.20
Precio en línea: $11.36
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47202

5.00 3
Image-RP46079

Delta®

Delta® Tapón de prueba de presión - Agua caliente/fría

Precio de lista: $6.20
Precio en línea: $4.96
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46079

Image-RP75136

Delta®

Delta® Kit de extensión TempAssure® serie 17T

Precio de lista: $85.50
Precio en línea: $68.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75136

Discontinuado
Discontinuado
Image-RP63988
Discontinuado

Delta®

Delta® Kit de conjunto interior para paredes gruesas - Válvula universal MultiChoice®

Precio de lista: $45.00
Acabados estándar

RP63988

Image-RP50366

Delta®

Delta® Conjunto de vástago con juntas tóricas y tuercas

Precio de lista: $24.75
Precio en línea: $19.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50366

5.00 1
RESEÑAS
Rated 5 out of 5 by from Perfect for remodel This was perfect for our bathroom remodel. We updated shower fixtures and Delta makes it very easy with this.
Date published: 2018-02-02
Rated 5 out of 5 by from Fits perfect Fit perfect. Was very happy that it was available with pecans connections. Thx!!
Date published: 2018-01-20
Rated 5 out of 5 by from Universal with service stops [This review was collected as part of a promotion.] This is a great alternative valve to the traditional Universal valve because of the service stops. Being able to shut off the water at the valve and do work on it is essential, why wouldn’t you pick this one? For a few extra dollars you buy a lot of piece of mind.
Date published: 2018-01-02
Rated 5 out of 5 by from Shower Upgrade This product was purchased while upgrading my shower. Delta always stand behind their product. All products are a great value! Will always purchase Delta in the future!!
Date published: 2017-12-22
Rated 4 out of 5 by from Great fit [This review was collected as part of a promotion.] Used this product in a remodel, and it fit exactly with the existing plumbing
Date published: 2016-12-08
Rated 5 out of 5 by from awesome we use these all the time there amazing
Date published: 2016-03-11
Rated 5 out of 5 by from Good buy! The valve body I was looking for at a competitive price. Thanks, lerock
Date published: 2013-02-06
Rated 5 out of 5 by from good product This valve is easy to install, has numerous trim options for any decor.
Date published: 2011-06-03
  • y_2024, m_11, d_4, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_R10000-PX, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

What is the meaning of "Universal?"

I have purchased one of these valves and want to use a trim kit by another maker. Is this valve compatible with other faucet makers? Do valve cartidges usually come with the trim kits?
Asked by: fixie
Hi fixie, Thank you for your question. This valve is only designed to work with Delta trim kits. The cartridge will be included with the trim kit. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-21

shower only pex bottom outlet connection

I am replacing a 10+ years 1400 series old valve body in which I sheared off (poorly designed as seen in middle picture) the 3 copper pipes connecting the valve body frame to the cartridge receptor drum, while trying to replace the RP19804 cartridge due to dripping shower head. I bought the R10000-UNBX, as although all my pipes are PEX, I also would need elbow and outlet fittings anyway to reach my current pipe locations. This is installed opposite the showerhead wall, in a knee-wall topped with glass enclosure, so the top outlet was capped off, and the shower was fed from the bottom outlet (as seen in 1st and 3rd pictures). The old valve had a few inches of copper pipe before the PEX connection (1st & 3rd pic). I also notice the RP10000 instructions mention the tub outlet (which I am using for shower only) drop pipe must be 8-18 inches copper only. Is this initial copper length only required for the pull-diverter mechanism from bath-spout to shower, or is it still required in my application and why, or can I connect my PEX directly to the bottom outlet using an NPT-PEX adapter?
Asked by: Ismail
Hi Ismail, Thank you for your question. If you are using the R10000-UNBX in a shower only installation, with the tub outlet going to the showerhead you can hook up the pex tubing directly to the valve as pictured. The 8"-18" copper pipe installation does refer to the tub spout diverter specifically to prevent shower rise. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Why not have a PEX crimp port on the top port to the shower spout?  This would eliminate using an adapter. What am I missing?

Asked by: Scott101
Thank you for your question, Scott101. This version has PEX crimp connections on the supply lines. The tub and spout outlet ports have 1/2" NPT male thread with 1/2" C.W.T. female sweat connections. You may connect a PEX adapter to the shower port. For a tub and shower installation, the drop to the tub spout must be 1/2" copper or iron pipe. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Why can PEX not be used for the tub down spout? Even with a PEX drop-ear, it's still a no go? Is it because if the constant pressure from switching to shower mode?

Asked by: Kahnartist
Hello, KahnArtist! Thank you for your question. The drop from the valve to the tub spout must be 1/2" copper or galvanized pipe. Other types of piping, such as PEX, have a different internal diameter. This affects how the water flows through the pipe and can cause back pressure, which may cause water to flow from the shower head when the tub spout diverter is not engaged. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Are there any options for a matte black trim kit that DOES NOT have a valve included? I bought the valves during rough in and now just need trim kits. Thank you

Asked by: Burge Burge
Hi, Burge Burge! Thank you for your question. Any of our Delta Monitor and TempAssure trim kits that start with a 'T' will not include the valve body and only include trim only. Here is a link to our Matte Black trim kits: https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?facetFinish=matteblack Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

T14497-LHP H797SS 58467-SS WATCO 38190-NB push pull trim kit

How can I increase the water flow? Is there a water restrictor / screen that can be cleaned / removed?
Asked by: Allan
Thank you for your question, Allan. The 58467-SS has a flow rate of 2.5 GPM at 60 PSI. You can measure the flow by running the water into a bucket for 1 minute. Please check for debris at the shower arm connection as this can cause reduced flow. We do not recommend removing or modifying the flow restrictor. The flow rate from the tub spout or shower arm with a 14 series cartridge will be approximately 5.8 GPM at 60 PSI. If you get reduced flow here, please try flushing the valve according to the How-To Video linked below. https://www.deltafaucet.com/video-gallery/video-page?videoId=aHDE586LwYk Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can pex pipe be used to shower head with this rough-in valve (R10000-PX) by using the proper threaded pex adapter?

Asked by: CT3002
Hi, CT3002! Thank you for your question. A PEX line can be used at the application between the Delta R10000-PX rough valve and the shower head. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the flow rate of this valve?

What is the flow rate of this valve?
Asked by: 5C
Hi 5C, Thank you for your question. The flow rate will depend on the trim kit series that you use. Below are the approximate flow rates per series at 60 PSI. 13/14 - 6.3 gpm 17 - 5.6 gpm 17T - 7.0 gpm Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-02-18
  • y_2024, m_11, d_4, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_R10000-PX, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 6ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.