Delta®

Conjunto interior universal MultiChoice® para tina/ducha - Entradas/salidas universales

N.º de modelo: R10000-UN
Delta®
Conjunto interior universal MultiChoice® para tina/ducha - Entradas/salidas universales
N.º de modelo: R10000-UN
Precio de lista: $7095
CARACTERÍSTICAS DEL PRODUCTO
La válvula universal MultiChoice® de Delta® le brinda la flexibilidad de actualizar el estilo y la funcionalidad de la ducha sin modificar la plomería detrás de la pared. Al instalar la válvula universal en primer lugar, usted tiene la libertad de decidir más adelante qué tipo de ducha quiere tener. Y si lo desea, también puede cambiar de parecer respecto del tipo de ducha. Independientemente de que pretenda una nueva apariencia o una nueva función para la ducha, se dará cuenta de que, gracias a las válvulas universales MultiChoice, nunca fue tan simple obtener lo que desea.
  • Cuerpo de válvula universal MultiChoice® únicamente
  • Acepta cartucho simple, doble o termostático doble
  • El cartucho se envía con los accesorios
  • Capacidad de instalación dorso contra dorso
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Technology and Special Features
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
4
Voltaje:
0
Tipo de válvula:
Cuerpo de válvula únicamente

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP83888

Delta®

Delta® Soporte - Válvula universal MultiChoice®

Precio de lista: $18.55
Precio en línea: $14.84
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP83888

3.00 2
Image-RP22734

Delta®

Delta® Bonete

Precio de lista: $14.75
Precio en línea: $11.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP22734

4.45 11
Discontinuado
Discontinuado
Image-RP46075
Discontinuado

Delta®

Delta® Protector de enlucido

Precio de lista: $5.40
Acabados estándar

RP46075

Discontinuado
Discontinuado
Image-RP46076
Discontinuado

Delta®

Delta® Cubierta para protector de enlucido

Precio de lista: $3.40
Acabados estándar

RP46076

Image-RP46077

Delta®

Delta® Rejilla para residuos

Precio de lista: $8.25
Precio en línea: $6.60
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46077

Image-RP46078

Delta®

Delta® Tapón de prueba de presión

Precio de lista: $10.30
Precio en línea: $8.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46078

Image-RP47202

Delta®

Delta® Accesorio de instalación de válvula universal MultiChoice® para paredes delgadas

Precio de lista: $14.20
Precio en línea: $11.36
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47202

5.00 3
Image-RP75136

Delta®

Delta® Kit de extensión TempAssure® serie 17T

Precio de lista: $85.50
Precio en línea: $68.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75136

Image-RP46079

Delta®

Delta® Tapón de prueba de presión - Agua caliente/fría

Precio de lista: $6.20
Precio en línea: $4.96
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP46079

Discontinuado
Discontinuado
Image-RP63988
Discontinuado

Delta®

Delta® Kit de conjunto interior para paredes gruesas - Válvula universal MultiChoice®

Precio de lista: $45.00
Acabados estándar

RP63988

Image-RP50366

Delta®

Delta® Conjunto de vástago con juntas tóricas y tuercas

Precio de lista: $24.75
Precio en línea: $19.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50366

5.00 1
RESEÑAS
Rated 5 out of 5 by from Contractor requested Updated a 1972 shower. Installer requested Delta product.
Date published: 2024-09-24
Rated 5 out of 5 by from Great universal valve Love these easy to use and install, universal valves!
Date published: 2024-09-04
Rated 5 out of 5 by from Easy install for DYI I replaced an older American Standard that had discontinued parts. I trust that this new Delta system will not go out of availablity for many years. It was easy to get installed and "max temp setup ".
Date published: 2024-08-21
Rated 5 out of 5 by from It works... I guess it's ok. This was more for our plumber than me, so i guess it worked great!
Date published: 2024-08-18
Rated 5 out of 5 by from Update to bathroom This is part of shower package, and works good
Date published: 2024-07-29
Rated 5 out of 5 by from Delta universal shower valve. Worked perfectly from the get-go.
Date published: 2024-07-03
Rated 5 out of 5 by from Easy to install Easy to install. Works well.
Date published: 2024-06-27
Rated 1 out of 5 by from Wrong part When the plumber began putting together the shower, he said the threads on one of the parts had a manufacture error. We ended up having to purchase ANOTHER valve and will have to pay the plumber even more to come back and to finish the job. Our project is now delayed and we are out even more money. Very disappointing.
Date published: 2024-06-07
  • y_2024, m_11, d_21, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_285
  • loc_en_US, sid_R10000-UN, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

In a 1-pc. fiberglass shower/tub , what size holes are needed for single lever faucet and tub spout ?

I am installing a 1755rb-716rb set and have to drill holes for valve and spout .
Asked by: Doug
Hi Doug, Thank you for your question! The hole for the valve should be cut to the size of the plaster guard which is 4" x 4". The hole for the size of the tub spout should be at least 1/2" for the pipe to fit through and no larger than the diameter of the tub spout, which is 3 1/8" on this model. Valve specs - http://www.deltafaucet.com/customersupport/documentation/r10000-unbx.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Trim kit specs - http://www.deltafaucet.com/customersupport/documentation/1755rb-716rb.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Best Regards, Daniel
Answered by: Delta5
Date published: 2024-03-28

what model of cartridge it needs

Asked by: transito
Thank you for your question, transito! The R10000-UN rough in body, can be used with Delta valve trims in the 13/14,17 and 17T series. Each trim would included a compatible cartridge, that would fit inside the valve. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

R10000 Rough in Body w/Stops version. (17T)

On either side of the valve body, there are two (2) mechanical stem and nut assemblies. I assume, when turning the stem(s) clockwise, and the stem(s) bottom out, this will stop the flow of water completely. Conversely, if I turn the stem counter-clockwise the flow of water increases. How can I tell, without backing the stem out further than need be, will I get full flow? Instructions say " adjust stem clockwise to close, and counterclockwise to open". I'm not sure if I understand the purpose of these stops. Thanks
Asked by: Rick
Hi Rick, Thank you for your question. These stops are designed to turn the water off directly at the valve during installation or repairs. They should be left in the open position when the trim is installed, as the cartridge will be used to turn the water on and off. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can I exceed the 18 inch max distance from valve to tub spout

I will be mounting a tub spout very near the floor of a shower stall and a rain head from the ceiling. I want to use the spout to drain the pipe to shower head and to let water warm up before diverting flow to rain head. The distance from valve to tub spout will be about 36 inches (3 times the max). Should I increase the size of the spout supply to 3/4 to reduce pressure so I don't have water flow through rain head until diverter is closed.
Asked by: Jon
Dear Jon, Thank you for your question. When using the Delta MultiChoice Universal Rough-In valve R10000-UN, the length between the valve and the tub spout has to be between 8"-18". If it is more than 18", you will have a situation called shower rise where water comes out of the showerhead when you only have the tub spout running. Best regards, Tanya
Answered by: Tanya
Date published: 2018-02-25

How do I determine which style valve I need (R10000-???)

Replacing existing rough valve that broke (moron who installed originally did not use stringer to support, valve just hung in mid-air by copper tubing). I have copper 1/2" tubing w/ soldered connections, Delta T13 Series Tub & Shower. Access to the back of valve through 2x4 framed wall w/ drywall. Fiberglass one-piece tub/shower.
Asked by: Craig
Thank you for your question. Since you are mounting this on a fiberglass shower, we would recommend using the R10000-UNWSBXT for a thin wall mounting.
Answered by: Delta1
Date published: 2024-03-28

What cartridges can be used for the valve';

Asked by: Dmead009
Hi Dmead009, Thank you for your question. The R10000-UN multichoice universal rough uses our 13/14 series cartridge RP46074, our 17 series dual function cartridge RP46463, and our 17T thermostatic cartridge RP47201. You need the appropriate trim that matches each cartridge. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I have the R10000-UNWS (with stops). After rough-in and cartridge, how far out to I need to unscrew the stops? I am getting low flow and wondering if I didn't unscrew them far enough, but I was worried they would come out of the body. Or do they stop?

Asked by: Hugh
Hi, Hugh! Thank you for your question. The screw stops on the R10000-UNWS will stop turning when fully open. You can turn the stops clockwise up to three full turns from the open position without a noticeable reduction in flow. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

What is considered the "finished wall" for installing a Delta R10000 Multi Choice value in an acrylic walk in shower unit??

For installing with a MAXX shower unit, the plasterguard should be flushed with the acrylic wall section (that is, the same as if you were installing with a tiled wall)?
Asked by: Jerry67
Hi Jerry67, Thank you for your question. That is correct! The finished wall will be the final surface after everything is installed. The acrylic wall section would be considered the finished wall in your installation. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28
  • y_2024, m_11, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_534
  • loc_en_US, sid_R10000-UN, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 3ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.