Conjunto interior universal MultiChoice® para tina/ducha - Entradas/salidas universales

Thank you for your question, RG! Yes, the Delta MultiChoice Rough-In valve with Stops R10000-UNWS will work with the Delta Linden Shower Trim T17293-SS. Best regards, Tanya

Thank you for your question. Delta Faucet model # R10000-UNWS contains a plasterguard that is used in aiding the installation of your faucet. It is not necessary to the functionality of the faucet. If you would like to replace it, the replacement part number is RP46075.

Hi, Kingtuck. Thank you for your question. The Delta MultiChoice Universal R10000-UNWS valve body will be full on after loosening the screw stops from the valve body. Best Regards, Rosanna

Thank you for your question. The temperature can be adjusted via the rotational limit stop. This part ships with the trim vs. the rough-in (Delta Model #R10000). Attached is an instruction sheet (page 7 of 94). http://www.deltafaucet.com/customersupport/documentation/t17238.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper

Dear Kathy, Thank you for you question! Yes, the R10000-UNWS valve can be used for either a tub/shower or shower only application. When you are installing it for shower only, simply cap the bottom port of the valve. Best Regards, Daniel.

Thank you for your question, MichiDan! A Diverting tub spout will need to be connected to the bottom port of the R10000-UNWS in order to divert the water to the R11000 diverting valve. We do not recommend diverting to a tub spout directly from this type of valve as there will be a noticeable reduction in pressure. Best regards, Edward

Thank you for your question, Daniel! The stops must be inserted in the R10000-UNWS valve body. You could alternatively use the R10000-UNBX valve that does not include screwdriver stops. https://www.deltafaucet.com/bathroom/product/R10000-UNBX Best regards, Edward

Thank you for your question, Steve. The 8"-18" measurement is from the center of the valve to the center of the tub spout pipe. Best regards, Jon

Hi Leigh, Thank you for your question! Any 13, 14, 17, or 17T series trim kit that we currently make will work with this rough-in valve. Trim-only kits will begin with the letter "T". http://www.deltafaucet.com/bath/tubshower/filter.html Best regards, Jon

Hi, Jeff! Thank you for your question. The Delta MultiChoice Universal R10000-UNWS Rough Valve Body will not have a reduced flow compared to the Delta MultiChoice Universal R10000-UNBX Rough Valve Body. Best Regards, Rosanna

Hi Dan, Thank you for your question! This valve has 1/2" NPT male threads with 1/2" female sweat supply fittings. Smooth 1/2" copper pipes can be soldered directly into the valve. Thanks, Jon

Thank you for your question. Delta model #R10000-UNWS is our Multichoice Universal rough. This will work with an array of tub/shower trims that have a single, dual, or dual thermostatic cartridge. Throughout our website, we recommend searching for tub/shower units that begin with T13*** or T14*** for the single; T17*** for the dual, or T17T*** for the thermostatic trim options. The cartridge will ship with the trim package selected.

Hi Eric, Thank you for your question. Delta Faucet model # R10000-UNWS can be used with a tub only trim. You will need to plug the top port which is used for the showerhead. Thanks. Jody

Hi Ed, Thank you for your question. The R10000-UNWS is our multi-choice universal rough. All of the current Delta tub/shower trims will fit this rough in valve. Thanks, Dave

Hi, Benjamin! Thank you for your question. The Delta TempAssure T17T459-H2O Tub and Shower Faucet, MultiChoice Universal R10000-UNWS Rough Valve Body, Delta T11759 Diverter Trim, and the R11000 Diverter Valve Body all work together to complete a custom shower. Best Regards, Rosanna

Hi E&A Tile, Thank you for your question. You will want to plumb in a diveter. The R11000 diverter rough and the matching T11859-RB 3 setting diverter trim will allow you to use each showerhead individually or both at the same time. Thanks, Dave

Thank you for your question. Delta Faucet model # R10000-UNWS can have the tub port plugged if you are not using a tub spout. We do not supply the plugs. It is a 1/2" pipe and if you contact your local retailer or wholesaler, they should be able to supply you with the appropriate plug.

Hi Liz, Thank you for your question. The R10000-UNBX is the most commonly used version of the rough. If you want to be able to shut the water off at the faucet when doing any repairs the R10000-UNWS will work for you as well. Thanks, Dave

Hi, Corry! Thank you for your question. We recommend to pair the MultiChoice R10000-UNWS rough valve body with the R11000 diverter body. Here is a link to this diverter body: https://www.deltafaucet.com/bathroom/product/R11000 Best Regards, Rosanna

Hello GL, Thank you for your question! We no longer manufacture any product in the Antique Brass finish. Best regards, Brandis

Hi Brian, Thank you for your question. If your bonnet nut is hard to remove we recommend soaking a towel in a 50/50 solution of vinegar and water and wrapping the towel around the bonnet nut. Allow the towel to soak overnight if possible. This should help break up the mineral build up allowing the nut to be removed. Thanks, Dave

Hi, Lilyanuh! Thank you for your question. The Delta MultiChoice R10000-UNWS rough valve body is compatible with our Delta Monitor T14064 trim kit. Best Regards, Rosanna

Thank you for your question, Dave! They will stop turning when fully open. You can turn the stops clockwise up to three full turns from the open position without a noticeable reduction in flow. Best regards, Jon

Hi, Vernon! Thank you for your question. We do have an extension kit for the Delta T14259-BLLHD trim. The extension kit is RP77991. Here is a link to this kit: https://www.deltafaucet.com/bathroom/product/RP77991 Best Regards, Rosanna

Thank you for your question, John! There are a couple options to divert the water between the shower head and a hand shower. The first is an in-wall diverter, which will require plumbing work. For this, you will need the R11000 Rough-In Valve and a 3-Setting Diverter Trim Kit to match your shower valve trim such as the T11851. You will also need a supply elbow for the hand shower hose, such as the 50560. https://www.deltafaucet.com/bathroom/product/R11000 https://www.deltafaucet.com/bathroom/product/T11851 https://www.deltafaucet.com/parts-product-detail?modelNumber=50560 The second option is to use a shower arm diverter, such as the U4923-PK or U4929-PK. https://www.deltafaucet.com/bathroom/product/U4923-PK https://www.deltafaucet.com/bathroom/product/U4929-PK Best regards, Jon

Hi Kingro, With the R10000-UNWS, you can use just a pipe cap on the tub spout outlet if you are installing this faucet as a shower only installation.

Hi, Steve A! Thank you for your question. We do have many trim kits that are ADA compliant. Here is a link to a few: https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?facetFeature=ADA Best Regards, Rosanna

Hi robinja, Thank you for your question. To install copper pipe on the R10000-UNWS you would have to solder the pipe connections. If using galvanized pipe the valve has a 1/2" male pipe outlet, you would need to install a coupling first and then the length of pipe to the drop ear elbow. Thanks, Dave

Dear Elenore, Thank you for your question. Yes, the Delta Addison Tub and Shower T17492-SS faucet can be install on the Delta MultiChoice Universal Rough-In valve with stops R10000-UNWS. The R10000-UNWS and R10000-UNBX are the same valves exact the R10000-UNWS has the stops on it. Best regards, Tanya

Thank you for your question, Kathy. This will depend on the trim kit that you purchased. Please refer to the Installation Instructions for help adjusting the Rotational Limit Stop, which will allow you to set the maximum temperature. Best regards, Jon