Llave para cocina retráctil de una manija en cromado

Hi Jess, Thank you for your question. We measure the water output by flow rate. You can reduce the flow rate from 1.8 to 1.5 gallons per minute using the RP61607 adapter between the hose and the faucet. This should help reduce any splashing. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP61607 Best regards, Jon

Chrome and plastic

Hi, Keith! Thank you for your question. The Innoflex® supply lines are 32". Best Regards, Rosanna

Hi Potzer, Thank you for your question! Below is the cleaning and care information for our products: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best regards, Brandis

9"

Hi, Fusionnm! Thank you for your question. We do not recommend to connect a water filter to the pull out sprayer assembly as potential pressure fluctuates during water filter operation may result in the hose rupturing. Best Regards, Rosanna

Hi Aaron, Thank you for your qusetion. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA; and Panyu, China. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Best regards, Jon

Hi, BA2012! Thank you for your question. The Delta 4159-DST Faucet is available in Chrome, Black Stainless, Matte Black, and Arctic Stainless Finishes. Best Regards, Rosanna