Llave para cocina retráctil de una manija en cromado

N.º de modelo: 4353-DST
Llave para cocina retráctil de una manija en cromado
N.º de modelo: 4353-DST
Precio de lista: $35725
CARACTERÍSTICAS DEL PRODUCTO
La varilla de rociado Multi-Flow™ le permite elegir entre un rociado con consumo eficiente del agua para las tareas cotidianas o un flujo alto de agua para llenar ollas y otros recipientes grandes un 33% más rápido*. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos. *Aumento temporal del flujo a demanda basado en el caudal estándar de 1.5GPM a 60 psi.
  • Las varillas de rociado Multi-Flow le permiten elegir entre un rociado o un chorro con consumo eficiente del agua para tareas cotidianas, o un alto flujo de agua para llenar ollas y otros recipientes grandes con un 33 % más de rapidez
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 1 o 3 orificios de 8"
  • Incluye cubierta opcional para uso con configuraciones de montaje adicionales y aspecto integrado
  • El tubo de salida desplegable gira 120 grados.
Technology and Special Features
Libres de plomo
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
11 3/8
Caudal:
1.5 gpm a 60 psi, 5.7 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP40650

Michael Graves™

Michael Graves™ Tornillo de fijación

Precio de lista: $6.30
Precio en línea: $5.04
Free Ground Shipping All Orders $49+
Acabados estándar

RP40650

5.00 3
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $15.85 - $43.60
Free Ground Shipping All Orders $49+
Acabados estándar

RP51502

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.30
Precio en línea: $5.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP21945

3.00 1
Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $39.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP63263

3.67 3
Image-Master-RP44645

Valdosta®

Valdosta® Cubierta - 3 orificios - Retráctil (cocina)

Precio de lista: $31.80 - $74.65
Free Ground Shipping All Orders $49+
Acabados estándar

RP44645

Discontinuado
Discontinuado
Image-RP49149
Discontinuado

Delta®

Delta® Contrapeso de manguera deslizante

Precio de lista: $34.20
Acabados estándar

RP49149

3.00 2
Image-RP44648

Palo®

Palo® Junta tórica - Retráctil

Precio de lista: $11.95
Precio en línea: $9.56
Free Ground Shipping All Orders $49+
Acabados estándar

RP44648

Image-RP49835

Delta®

Delta® Tuerca de montaje, arandela y tornillos (2)

Precio de lista: $37.55
Precio en línea: $30.04
Free Ground Shipping All Orders $49+
Acabados estándar

RP49835

Image-Master-RP60963

Linden®

Linden® Wand Assembly

Precio de lista: $117.95 - $174.15
Free Ground Shipping All Orders $49+
Acabados estándar

RP60963

Image-Master-RP60962

Linden®

Linden® Escutcheon & Gasket - 1H Kitchen

Precio de lista: $25.80 - $36.90
Free Ground Shipping All Orders $49+
Acabados estándar

RP60962

Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $7.25
Precio en línea: $5.80
Free Ground Shipping All Orders $49+
Acabados estándar

RP13938

4.50 2
Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

Precio de lista: $95.40
Precio en línea: $76.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP50390

3.96 27
Image-Master-RP60966

Linden®

Linden® Button - Red / Blue - Finished

Precio de lista: $17.40 - $25.05
Free Ground Shipping All Orders $49+
Acabados estándar

RP60966

Discontinuado
Discontinuado
Image-RP50391
Discontinuado

Delta®

Delta® Junta y placa base - Retráctil 1H

Precio de lista: $22.95
Acabados estándar

RP50391

Image-Master-RP60965

Linden®

Linden® Metal Lever Handle Kit

Precio de lista: $62.95 - $94.20
Free Ground Shipping All Orders $49+
Acabados estándar

RP60965

Image-Master-RP60964

Linden®

Linden® Hub Assembly - Pull-Out

Precio de lista: $102.45 - $148.45
Acabados estándar

RP60964

RESEÑAS
Rated 1 out of 5 by from no longer swivels left-right in under a year Faucet became difficult to swivel within six months. I have a softener, but it was concreted in place about 1.5 years after installed. No other faucet I have had in the 30 years in this house has done this. Support wanted photos of all the internal parts so they might possibly send parts free. I don't know how or even if this concreted thing can be taken apart after being calcified in place 5+ years. The plumber said it was shot and he would not waste time repairing, but call Delta to see if they will send a free replacement. Nope.
Date published: 2025-04-07
Rated 2 out of 5 by from Does not shut off, leaking Does not shut off properly
Date published: 2025-02-07
Rated 5 out of 5 by from Delta Kitchen Faucet and Soap Dispenser Excellent replacement for an old Kohler kitchen faucet, plus a lifetime warranty
Date published: 2024-12-04
Rated 5 out of 5 by from Replacement faucet Just the style we were looking for. It was replacing one of like kind
Date published: 2024-11-26
Rated 2 out of 5 by from Pull-out section is cheap and not metal The pull-out handle is not metal and it feels very cheap. I didn’t see that listed anywhere in the product description. If it’s there, it’s hidden well! Quite a disappointment and I do NOT RECOMMEND.
Date published: 2024-08-20
Rated 2 out of 5 by from CHEAP non-metal pull-out I bought this faucet for my mother-in-law. I did not see anywhere in product description that the pull-out section is NOT METAL. Ugh. Very deceptive of Delta. I would not have purchased it and I do not recommend.
Date published: 2024-08-13
Rated 5 out of 5 by from Good selection In-stock with competitive pricing.
Date published: 2024-05-03
Rated 1 out of 5 by from My overall review rating was changed! I gave your Faucet a 1 star Very POOR ! not 2 star
Date published: 2024-04-02
  • y_2025, m_5, d_1, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_178
  • loc_en_US, sid_4353-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

How do you access the handle set screw on a Linden Single Faucet?

After 4 years, the handle on my Linden Single Handle Kitchen Faucet has started to loosen up. I see that there is a cap/cover over what I believe to be the set screw. Just looking for a little advice on best way to remove this, to avoid damage to the cap or the screw behind it.
Asked by: Greywolf59
Hi Greywolf59, Thank you for your question. The button cover can be removed by hand or carefully pried out using a small flat tool. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-12-12

I purchased this faucet from Amazon but I can't tell if I need to purchase anything else with it. I'm getting new cabinets, sink and faucet. Do I need a valve kit? Or anything else? Thank you

Asked by: Mercy7675
Thank you for your inquiry, Mercy675! The Delta Linden Pull-Out Kitchen 4353-DST faucet is a complete unit ready for installation. There are no extra parts need for this faucet install. Please see the below Maintenance/Installation document link for this faucet, for more information on the install. https://media.deltafaucet.com/MandI/85216%20Rev%20C.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Does the unit itself move side to side for double sinks?

Asked by: Ridge
Hi, Eldridge! Thank you for your question. The Delta 4353-DST Faucet spout swivels 120 degrees. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-04-01

I see you state the Delta 4353-DST is not compatible with RO water. Why is that? Is there are rebuild kit for the same kitchen faucet?

Asked by: Brock from the UP
Hello, Brock from the UP! Thank you for your question. The reverse osmosis process removes minerals, which can lower the pH of the water. As of right now, only our Beverage Faucets are designed to work with reverse osmosis systems. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

4353-dst The faucet body will no longer swivel (120 degree movement) side to side. Does the o-ring RP-44648 need to be replaced?

Asked by: irene
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To place an order for you, we would like to gather some more information first. Could you please provide your full name, address, phone number, and date of install. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-04-01

How can I unscrew mounting nut? Part number RP49835

Asked by: Tom
Thank you for your question. Delta Faucet part # RP49835 has two screws that hold it in place. These can either be removed with a phillips head screwdriver or a socket wrench.
Answered by: Delta1
Date published: 2024-03-28

I need to move the Linden 4353 faucet to the side of the sink but discovered the hot and cold water feed tubes are too short. Can they be replaced with longer ones?

Asked by: Vince
Hi, Vince! Thank you for your question. There is no longer supply lines that will work with the 4353-DST faucet as the supply lines are not replaceable parts on the faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Re: faucet 85216; Does the Hub Assembly (RP60964) swivel?

Asked by: elm101139
Thank you for your inquiry, Elm101139! Yes, the spout hub assembly of the Delta Linden Kitchen Pull-Out 4353-DST faucet rotates 120˚. https://media.deltafaucet.com/SpecSheet/DSP-K-4353-SD-DST%20Rev%20B.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

How can I unmount mounting Nut, Part number RP49835

What do I have to do after unscrew two screws on both side in ordert to take out mounting Nut. Thanks
Asked by: Tom
Thank you for your question. Delta Faucet part # RP49835 has two screws that hold it in place. These can either be removed with a phillips head screwdriver or a socket wrench. Read more: http://www.deltafaucet.com/kitchen/details/4353-dst.html#/?tab=ask_answer#ixzz20Wmd0Thz
Answered by: Delta1
Date published: 2024-03-28

describe limited warranty

Asked by: Kathleen
Thank you for your question, Kathleen! The Delta Lifetime Limited warranty will provide repair parts to the original owner on any products that may have a manufacture defect within the applicable warranty period. For a residential faucet, this is for as long as the original owner owns the residence in which the faucet is originally installed under normal installation, use and service. This means that by installing and using the product other than advised or intended may also void this warranty including finishes damaged by cleaners that are not approved. Please also refer to the full warranty page as well as our cleaning and care guides below for further clarification. https://www.deltafaucet.com/service-parts/warranty https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

The RP49835 Mounting Nut is difficult to get off. Do you have a tool to fit this unique nut?

Asked by: Dan F
Hi, Dan F! Thank you for your question. The RP49835 mounting nut for the Delta 4353-RB-DST faucet does not require a special tool to be removed. After the screws are removed, we recommend to use just an adjustable wrench or strap wrench to remove the mounting nut the rest of the way. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What material is this made from? Can it start with full stream, instead of water effecient?

Is this faucet metal/all metal? When you turn the water on, will it start with the full flow stream?
Asked by: AllStarship
Thank you for your questions. Delta Faucet model # 4353-RB-DST is made of metallic and non-metallic componets. When turned on, the faucet will always start in the water efficient stream. The user can then toggle it to the full stream position but when the water is turned off, it will return to the water efficient stream.
Answered by: Delta1
Date published: 2024-03-28

I have trouble regulating the water temperature between hot and cold - either water is super hot or cold - any suggestions to get warm/hot water?

Asked by: TiffanyE
Hi, TiffanyE. Thank you for your question and I am sorry to hear that you are experiencing an issue with your water temperature for your faucet. The valve cartridge may need to be replaced. The cartridge assembly is RP50587. Here is a link to the part on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

How do you disconnect the spray from the hose? The salesman told me that it would come off. I have fish and a tank cleaner/filler that attaches to my faucet. I need to use it but don't want to risk breaking the faucet by trying to force it to unscrew.

Asked by: janegael
Hi, Janegael! Thank you for your question. The Delta 4353-AR-DST faucet sprayer assembly can be removed by simply unscrewing the sprayer from the hose in a counterclockwise position. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I just bought a 4353-AR-DST and I am now reading all the reviews talking about swivel problems and leaks. Should I return the faucet or are there parts you can send me preemptively? The plumber and sink installer are coming next week. Thanks.

Asked by: midwel
Hello Midwel, Thank you for your question. Although there is no known issue with the Delta 4353-AR-DST faucet, please know that all of our products are tested to ensure long-lasting use and have a Lifetime Limited Warranty. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Hello. The pictures show an additional collar added between the faucet and the countertop when mounting on a single hole. Is this included or does this have to be purchased separately?

Asked by: JPhe23
Hi, JPhe23! Thank you for your question. The Delta 4353-AR-DST faucet escutcheon ring is included. This part number is RP60962AR. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does the pull out faucet have a removeable aereator for cleaning?

I have another model and it does not have removeable feature.
Asked by: abby
Thank you for your question. Delta Faucet model # 4353-RB-DST does not have a removable aerator for cleaning. You can soak the wand in a 50/50 soluttion of white vinegar and cold water overnight to remove any hard water deposits.
Answered by: Delta1
Date published: 2024-03-28

does this faucet have a magnetic return on the sprayer to hold it in place?

Asked by: Strider
Hi Strider, Thank you for your inquiry! The Delta Linden Kitchen Pull-Out 4353-AR-DST faucet is not designed with the Magnatite Docking feature. You would need to push the wand/sprayer assembly back into the spout when, when finished using it. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

I purchased two Delta # 4353-ar-dst kitchen faucets from Heatwave Supply in Tulsa, OK in October of 2013. One of the two is very hard to turn and it looks like some type of grease is coming out around where the base swivels. How do I fix the problem?

Asked by: Paul 69
Hi, Thank you for your question. I apologize for the issue with the Delta faucet. I'd be happy to help and i've reached out to you via email. Please refer to my email for assistance. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Delta 4353-AR-DST-Linden

Does above faucet have a flow restricter that can be removed?
Asked by: Winnie
Dear Winnie, Thank you for your question. The Delta 4353-AR-DST-Linden kitchen faucet has a Multi- function wand assembly, with a 1.5 in spray mode and a high pressure button for 2.2 in aerated mode. The Delta faucets do not have removable restrictors or adapters for increasing or decreasing the designed flow rate of the faucet. Best Regards, Tanya
Answered by: DeltaFaucet9
Date published: 2016-08-24

Wand Shutoff?

Does the pull out “wand assembly” have a water shut-off button? That is, can you shut the water flow completely OFF from the wand assembly?
Asked by: GrumpyGeezer
Not to my knowledge. If the water is on, it will come out of the wand assembly.
Answered by: Carolyn
Date published: 2024-03-28

Does this come with the drains?

Asked by: Beck
Hi Beck, Thank you for your question. The Delta Linden 4353-RB-DST faucet is designed for a Kitchen installation. This unit does not come with any drain/pop-up assemblies. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Can I buy a replacement handle?

Asked by: Jack77
Hi, Jack77! Thank you for your question. The Delta 4353-RB-DST Faucet handle replacement is available for purchase. The part number is RP60965RB. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60965RB Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Why do you not show the aerator

Asked by: Buster
Thank you for your question, Buster! Model 4353-AR-DST does not include a removable aerator for the wand. We recommend removing the wand itself to check for debris as well as pouring a 50/50 solution of white vinegar and water into the wand for hard water buildup. Please contact us directly if you need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

can it swivel from one sink to the other sink?

Can it rotate?
Asked by: jojo
After 5 years, we had to take the faucet off the sink and take it fully apart to clean corrosion from the inside that was keeping it from swiveling. Now it is functioning like new!
Answered by: jehuca
Date published: 2024-03-28

Is a replacement faucet head available for purchase?

Asked by: Brady15
Hi, Brady15! Thank you for your question. The Sprayer Assembly for the Delta 4353-RB-DST Faucet is replaceable. The part number is RP60963RB. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60963RB Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is this faucet compatible with Reverse Osmosis water?

Asked by: Holmes1
Thank you for your inquiry, Holmes1! The Delta Linden Kitchen 4353-RB-DST faucet is not compatible with reverse osmosis systems. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Is the disc valve made of plastic or ceramic?

Asked by: Sarah
Hi Sarah, Thank you for your question. Diamond Seal Technology cartridges have ceramic discs. Please click the link below for more information. http://www.deltafaucet.com/smart-solutions/diamond-seal-technology.html?filter=all Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

So is this lead-free?

So confused between standards and whether "new" products are doing anything additional. Also is this manufactured in the USA with parts made in the USA?
Asked by: toomanyfaucets
Yes, lead-free and made in USA.
Answered by: BivH
Date published: 2024-03-28

how to replace the pull down hose

Asked by: CAROL
Thank you for your question, CAROL! The wand will unscrew from the hose first. After the shut off supplies are safely turned off below the counter, you can then discount the clip that holds the hose onto the nipple outlet. Pull the hose straight up from above the counter, twisting occasionally if it gets caught inside, then insert the new hose down into the hub and clip it onto the outlet. Be sure to re-use the hose weight to keep this hose working properly. Now attach the wand and turn the hot and cold water shut off's back on and test the faucet to check for leaks. https://media.deltafaucet.com/PartsDiagram/DPD-K-4353-DST%20Rev%20B.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2025, m_5, d_2, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_136
  • loc_en_US, sid_4353-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 39ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.