Accesorio de válvula únicamente Monitor® serie 14 en cromado

Thank you for your question. Delta Faucet model # T14051 is recommended to be paired with the R10000-UNBX. This valve is our multi-choice valve which means that once it goes into the wall, the consumer can change the trim without going into the wall. They can upgrade to the 1700 series if they would like or change finishes and stay in the 1300/1400 series.

Hi, Randy! Thank you for your question. The Delta Monitor 14 Series MultiChoice Valve first year of production was 2006. Best Regards, Rosanna

Hi Ale, Thank you for your question. The size of the allen wrench that you need is 3/32" for your model T14051-RB faucet. Thanks, Dave

Hi, Bill! Thank you for your question. The Delta Monitor T14051-CZ Valve Trim Escutcheon Plate measures 7" (178 mm). Best Regards, Rosanna

Hi Karren, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Faucet part RP50465 Screw & Wrench can be ordered online and locally. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Skyler

Hi valued customer, Thank you for your question about the Delta Faucet model T14051. We are happy to help! This trim includes the replaceable cartridge RP46074. Recommended maintenance for a drip or small leak is to replace the RP4993 seats and springs in the legs of the cartridge. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi BJM 1234, thank you for contacting Delta Faucet Company! We apologize that you are not receiving your desired temperature, we are happy to help! To adjust your 1400 series temperature for hotter water, please follow the instructions below. You shouldn't need to shut your water off but keep in mind it is still possible for the water to turn on if the stem is rotated. Please gather 1/8" allen wrench for a lever handle and a philips screwdriver for a knob handle. 1. Remove your handle with your 1/8" allen wrench. The set screw should be under the lever of the handle. If you have a knob, please remove the cap on the tip of the handle. You will need a philips head screwdriver to remove the screw. 2. Pull the sleeve assembly off of the valve. This is the cylindrical part behind your handle that hides the valve body. 3. You will see a brass stem and a plastic white piece on the tip of the cartridge. The white piece has notches on it to grip it easier. 4. Please pull the white piece towards you and rotate counter-clockwise for hotter water. *Please note there is a limit to how far this will rotate, if you rotate to the hottest setting it will be the same temperature as your water heater. This is not recommended as it can cause scalding. Please also note that each notch you rotate to can range anywhere between 4 and 16 degrees Fahrenheit.* Now you are able to install your sleeve and your handle onto your valve. Turn your water on and see if this is your desired temperature. If it is, tighten the set screw or the screw and the temperature adjustment on the cartridge is done! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Catmando, thank you for your interest in the T14051-SS! The RP29569 spacer goes inside the sleeve and is used to help provide a more secure installation when the sleeve is slid forward on the valve. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist