Llave para cocina extensible de una manija con tecnología Touch<sub>2</sub>O® en cromado

N.º de modelo: 9159T-DST
Llave para cocina extensible de una manija con tecnología Touch<sub>2</sub>O® en cromado
N.º de modelo: 9159T-DST
Precio de lista: $89990
CARACTERÍSTICAS DEL PRODUCTO
Tóquela para que se abra. Tóquela para que se cierre. Ya sea que tenga las manos ocupadas o los 10 dedos sucios, la tecnología Touch2O® de Delta® ayuda a mantener la limpieza de su llave, incluso cuando tiene las manos sucias. Un simple toque en cualquier parte del tubo de salida o de la manija con la muñeca o el brazo activa el flujo de agua a la temperatura establecida según el ajuste de la manija. La luz de LED TempSense™ de Delta cambia de color para indicarle la temperatura del agua y descartar cualquier sorpresa o incomodidad que pudiera surgir. El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. Los componentes electrónicos están respaldados por nuestra garantía para componentes electrónicos por 5 años. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • Con tecnología Touch2O®, con solo tocar cualquier parte de la salida de la tina o la manija se abre y se cierra el flujo de agua
  • Permite mantener la llave más limpia, porque al lavarse las manos no tiene por qué ensuciar su llave
  • La luz LED azul indica cuándo se activa el modo táctil, y la luz roja, cuándo la batería se está acabando
  • El corte automático del flujo de agua después de cuatro minutos ayuda a ahorrar agua
  • La luz de LED TempSense™ integrada indica la temperatura del agua: cambia de azul a magenta y de magenta a rojo a medida que aumenta la temperatura.
  • Funciona con 6 baterías AA (incluidas), con una duración de las baterías de hasta 1 año, o 6 C (no incluidas), con una duración de aproximadamente 3 años.
  • La tecnología Touch2O® intuitiva detecta la diferencia cuando se toca el producto y cuando se lo golpea, y así, se reducen las posibilidades de activación falsa
  • El adaptador de CA EP102157 opcional puede pedirse por separado
  • El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Instalación con 1 o 3 orificios de 8"
  • Cumplimiento con la ADA
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
VoiceIQ® Compatible
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 6" o 8"
Overall Height (in.) :
16 3/16
Voltaje:
0
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Discontinuado
Discontinuado
Image-EP73954
Discontinuado

Delta®

Delta® Fuente de alimentación de CA

Precio de lista: $63.80
Acabados estándar

EP73954

4.35 37
Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $24.55
Precio en línea: $19.64
Free Ground Shipping All Orders $49+
Acabados estándar

RP37490

3.20 5
Image-RP71506

Trinsic®

Trinsic® Espaciador de aislamiento

Precio de lista: $19.60
Precio en línea: $15.68
Free Ground Shipping All Orders $49+
Acabados estándar

RP71506

1.50 2
Discontinuado
Discontinuado
Image-RP64073
Discontinuado

Trinsic®

Trinsic® Protector de manguera

Precio de lista: $20.20
Acabados estándar

RP64073

Discontinuado
Discontinuado
Image-RP64074
Discontinuado

Trinsic®

Trinsic® Junta - Llave extensible

Precio de lista: $17.90
Acabados estándar

RP64074

Image-RP63265

Delta®

Delta® Adaptador - Junta deslizable

Precio de lista: $48.95
Precio en línea: $39.16
Free Ground Shipping All Orders $49+
Acabados estándar

RP63265

Image-RP80619

DELTA

DELTA Tuerca de bonete

Precio de lista: $19.65
Precio en línea: $15.72
Free Ground Shipping All Orders $49+
Acabados estándar

RP80619

Image-RP63264

Delta®

Delta® Kit de adaptadores - Compresión PEX (10)

Precio de lista: $77.60
Precio en línea: $62.08
Free Ground Shipping All Orders $49+
Acabados estándar

RP63264

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $37.90
Precio en línea: $30.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP63263

3.67 3
Image-Master-RP64069

Trinsic®

Trinsic® Conjunto de rociador - Extensible

Precio de lista: $86.35 - $125.60
Free Ground Shipping All Orders $49+
Acabados estándar

RP64069

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $58.35
Precio en línea: $46.68
Free Ground Shipping All Orders $49+
Acabados estándar

RP80977

3.35 34
Image-RP49835

Delta®

Delta® Tuerca de montaje, arandela y tornillos (2)

Precio de lista: $35.75
Precio en línea: $28.60
Free Ground Shipping All Orders $49+
Acabados estándar

RP49835

Image-RP60114 Secondary Image-RP60114

DELTA

DELTA Válvula Euro-Motion DIAMOND

Precio de lista: $65.50
Precio en línea: $52.40
Free Ground Shipping All Orders $49+
Acabados estándar

RP60114

5.00 8
Image-EP100855 Secondary Image-EP100855

DELTA

DELTA VoiceIQ® Module

Precio de lista: $200.15
Precio en línea: $160.12
Free Ground Shipping All Orders $49+
Acabados estándar

EP100855

4.30 99
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $20.35
Precio en línea: $16.28
Free Ground Shipping All Orders $49+
Acabados estándar

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Conjunto de manguera

Precio de lista: $79.85
Precio en línea: $63.88
Free Ground Shipping All Orders $49+
Acabados estándar

RP80522

5.00 1
RESEÑAS
Rated 2 out of 5 by from Hot and cold labels not consistent I have both this faucet and the Trinsic single-handle bathroom vanity faucet. The cold and hot label are in the opposite direction. For one faucet, when you pull towards the wall, it is hot; in the other, it is cold. It is dangerous for young children, and annoying for us and guests as it is not consistent. Is there any way this can be fixed?
Date published: 2024-11-02
Rated 2 out of 5 by from Touch Technology Isn’t There Yet This thing turns on and off randomly, the touch works and doesn’t work, the batteries die after 1-2 months and then no water passes at all (so definitely have many spares on hand)… it does look nice though.
Date published: 2024-10-23
Rated 4 out of 5 by from Great!! But handle needs a cover. Installed this a few years ago: Love it! However the handle needs a cover so it doesn’t activate the on/off switch for water supply when trying regulate the volume/temp. Frustrating but manageable. Hopefully Delta has a handle cover (can’t find one).
Date published: 2024-06-24
Rated 5 out of 5 by from Stunner! Adds that extra somethings SPECIAL! Love it!
Date published: 2024-06-10
Rated 5 out of 5 by from Love this faucet Gorgeous faucet and love the functionality
Date published: 2024-05-31
Rated 1 out of 5 by from Disappointed with Delta I registered this product when it was first purchased in 2018. The product no longer works and as I try to find out warranty information, Delta deleted my original registration. Now I have to re-register my product again to even get help. This is both an inconvenience and perhaps a policy change if they no longer provide warranty on my product. Frustrating!!!
Date published: 2024-05-28
Rated 3 out of 5 by from Not the best finish for hard water It was very easy to install and so far works very well. I just wouldn’t recommend it to anyone who has hard water as it shows every single water spot.
Date published: 2024-04-22
Rated 2 out of 5 by from Touch activation very touchy I have remodeled a lot of homes, and lived in them after. I would not buy the touch version again. It doesn't work well and can shut the water off for a while when it gets confused. We have a lot of problems just turning the faucet on. We have to turn it on with the handle and then touch it again. I have had two other touch activated or touchless faucets and they worked well . This one is a pain. The one good thing is that the handle can be rotated to the front, so you really don't need the touch activated version to keep water from dripping near the handle all the time. I would buy the standard version over the touch activated version. My other problem is the spray head seems to ricochet water all over the place. I haven't had this problem with other faucets. Even when I turn the pressure down under the sink this faucet seems to ricochet water everywhere and the counters always get wet. I wouldn't buy this faucet again.
Date published: 2024-04-01
  • y_2024, m_12, d_22, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_216
  • loc_en_US, sid_9159T-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Battery Box Location

Hello, In the install directions, it says that the optimal location for the battery box is on the cabinet floor vs the cabinet wall. Why is this? Thanks!
Asked by: triplee121
Hi triplee121, Thank you for your question. We recommend placing the battery box on the floor of the cabinet as it is used to establish a base-line for the Touch2O feature. The closer to the ground it is the better reading it will get. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2019-07-17

Is there a maximum psi recommended for this faucet?

Asked by: Trampoline
Hi, Trampoline! Thank you for your question. The faucet limitation for our conventional faucets such as the 9159T-DST unit is 20psi to 100psi. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can the handle be mounted on the LEFT

I currently have a kitchen faucet with a detached handle mounted in a hole 4&quot; to the right of the faucet. I'm looking to replace this setup with a single handle kitchen faucet that will let me mount the handle on the LEFT side so I can use the existing hole 4&quot; on the right for a filtered water dispenser. Questions: 1) Will this faucet let me mount the handle on the left? 2) Is there anything related to mounting the faucet that will interfere with my re-use of the hole 4&quot; to the right of the faucet?
Asked by: Dr. Horse Jumper
Hi Dr. Horse Jumper, Thank you for your question. The faucet is designed for the handle to be installed on the right. Unfortunately, installing it on the left will cause the handle to rotate backwards, and the LED light will not be visible. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Champagne Bronze Matches what finish at Newport Brass?

I need to buy a hot water dispenser to match my 9159T-CZ-DST. What finish would I order from Newport Brass?
Asked by: Melissa
Thank you for your question, Melissa. Unfortunately, we are unable to make a suggestion regarding other brands. Please click the link below to see our selection of Beverage Faucets in the Champagne Bronze finish. These have a single supply line that can be connected to either cold or hot water. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage?facetFinish=champagnebronze Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

My handle fell off...how can it be re-attached correctly? I believe I have 9159T or 9959T model

Asked by: Laura
Is the part number interchangeable on different models? Thank you&nbsp;
Answered by: Laura
Date published: 2024-03-28

Can you hardwire this model so it does not have to run on batteries to use the touch feature?

Asked by: Sarah
Hi Sarah, Thank you for your question. We do not recommend hard wiring the model 9959T-AR-DST faucet. The faucet is designed to operate with battery power. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Hi we installed the faucet in June. The red light is flashing and the water isn&rsquo;t coming out. How can we fix this?

Asked by: Robin
Thank you for your question, Robin! I do apologize that you are not getting water, but will be more than happy to help! A flashing red light, would indicate low batteries. You should be able to get water back, once new batteries are installed. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Cleaning. Mineral build up

I have this trinsic kitchen faucet in champagne bronze. The end of the faucet on the bronze finish is starting to develop mineral build up. What should I clean this with? I have had this product for one year. Thank you.
Asked by: Meghan
Hi, Meghan, Thank you for your question. We recommend to clean with 50% white vinegar and 50% water solution mix. Here is more suggestions from our FAQ: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409&reg; Antibacterial All Purpose Cleaner, Fantastik&reg; All Purpose Cleaner, or Windex&reg; Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-01-05

Can this faucet be placed in permanent bypass mode? Looking to eliminate the tap mode

Asked by: sttarks
Hi, sttarks. Thank you for your question. The Delta 9959T-AR-DST faucet touch function can be manually bypassed. To do this, first turn the water off at your water supply for your faucet. Under the sink, you will see the solenoid assembly with two water lines coming from the bottom and top of the solenoid. These are connected with two blue clips. Remove the two clips to remove the whole solenoid assembly. Connect the two lines together and secure this connection with one of the blue clips. Pull the connection to make sure the connection is tightly secured. Please contact us back if you should need further assistance. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the rj-45 port on the solenoid for?

Asked by: A-Aron
Hi A-Aron, Thank you for your question. This port is used by our engineers for diagnostic purposes. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-16

Is this faucet made in the USA. How can I tell which products are?

Asked by: antnee
We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company&rsquo;s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made.
Answered by: Delta1
Date published: 2024-03-28

My faucet water flow has slowed to a trickle. How do I fix this?

Asked by: Anna
Hi, Anna! Thank you for your question and I am sorry to hear that you are experiencing low flow from your Delta faucet. We recommend to flush the lines and clean the debris screen at your solenoid assembly under the sink. To flush the lines, make sure your handle is in the 'off' position. Disconnect the top hose from your solenoid assembly and point it into a bucket. Turn on the water from your handle and let the water flow through the open hose into the bucket. Does it have adequate flow? Since the hose is disconnected, this is a good time to take the debris screen out of the solenoid. The debris screen is located in the opening of the solenoid where the hose was connected into. Take a pair of needle nose pliers and pull the small debris screen out. Clean the debris screen by rinsing it in running water at another faucet in your home since your kitchen faucet will be disconnected. Install it back into the solenoid and connect everything back up. Turn the handle in the off position. Disconnect the hose from the bottom of the solenoid. Point the whole solenoid into the bucket. Turn the handle in the 'on' position. Flush the solenoid through. If this does not fix the flow issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What does a red light on mean?

A red light keeps coming on instead of the blue light? What does this mean?
Asked by: AJK
Hi AJK, Thank you for your question! For models manufactured prior to 2015, a solid red light means that the batteries will need to be replaced. Solenoids manufactured after January 2015 will cause the light to flash red when the faucet is turned on or off if the batteries need to be replaced. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-09-21

What filtered water faucet matches this Trinsic Faucet?

I am looking for a filtered water faucet in the same style and finish since they will be mounted right next to each other. Does Delta make anything?
Asked by: digitron6
Hi Digitron6, Thank you for your question. We offer 2 styles of beverage faucets. The model 1914-CZ-DST which has a traditional style and the 1977-CZ-DST which has a transitional design. Neither are an exact match for the Trinsic model 9159T-CZ-DST. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I love the features &amp; appearance, but the reviews suggest there are some issues with the technology and a few features. On the other hand, there are many 5* reviews. Is there another model you can recommend that has a more consistent performance?

Asked by: Renee
Hi, Renee! Thank you for your question. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. Here is a link to our Limited Lifetime Warranty information for our Delta faucets: https://www.deltafaucet.com/service-parts/warranty If there are any issues with your Delta faucet, please feel free to contact our customer service department at 1-800-345-3358 or email us at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

My Delta Touch faucet quit working altogether. The touch and the handle. I replaced the batteries and now the handle works, but not the touch of the neck. The model number on the Faucet is X00074950. What do I need to do to get it working?

Asked by: Anonymous
Hello, Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. To better assist you with this inquiry, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Blue Light On or Off

When the faucet lever is on (open), and the water is off and not flowing, should the blue light be off since the water is not flowing? Or should the blue light be on even when the water is not flowing? As of now, the blue light only comes on when the water is flowing, and off when it is not. Is this correct?
Asked by: Tom
Hi Tom, Thank you for your question. What you are describing is correct. The blue light should be on only when the water is flowing. The light should not be on when the handle is in the on position but the touch feature is used to turn the water off. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How big do I cut the hole in my granite countertop?

Asked by: June
Hello June, Thanks for your question. You can take a look at the recommended hole size in the Technical Specifications: http://www.deltafaucet.com/customersupport/documentation/9159t-dst.html?document=ts&amp;fromDetailArea=kitchen&amp;documentIndex=0#flashWrapper This should have the information you are looking for.
Answered by: DeltaFaucet4
Date published: 2024-03-28

Hi, does the blue touch light turn on even when the sink / water is turned off? Also, can this go hands free - or touch only?

Asked by: ARJR
Hi, ARJR! Thank you for your question. The blue light on the Delta 9159T-CZ-DST Faucet will stay on when the handle is in the 'on' position to let you know that the faucet is ready to be used by touch. At this time, the faucet is not hands free and operates by touch. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How do I set the limit stop?

Asked by: Muffikins
Thank you for your question, Muffikins. This faucet does not have a rotational limit stop for the handle. It will rotate from full cold (upright) to full hot (forward). Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Just had this installed 3 days ago and it just stopped working. Replaced the batteries and it started functioning again. It doesn&rsquo;t rely on batteries for manual function so what is going on?!

Asked by: Jessica B
Thank you for your question, Jessica B! The solenoid assembly is a component or &quot;valve&quot; that opens and closes when the faucet is touched. The faucet will work manually with the handle so long as this valve is open, however if left in a &quot;closed&quot; position while without power, this valve is unable to open on its own. Before this happens, the faucet can be put into a manual model by touching the faucet on and removing the lid of the battery box, or by removing the solenoid assembly entirely. An optional A/C power supply is available for purchase and will work in conjunction with the battery pack to ensure your model never looses power. https://www.deltafaucet.com/parts-product-detail?modelNumber=EP73954 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

What does a flashing red light mean?

Asked by: jillsy
Thank you for your question, Jillsy! Normally, if a Delta touch faucet has a flashing red light, it means the batteries need to be changed. If batteries are not changed it can cause the solenoid to shut does and no water will run out of the faucet, until the batteries are replaced. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Does the handle move back as well as forward?

My backsplash is a little less that 3 inches from the center of the hole.
Asked by: Susan
Thank you for your question, Susan! The handle will only move forward from the upright position. We recommend having 2 1/2&quot; or more between the backsplash and the center of the mounting hole. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-24

I love this faucet and I&rsquo;m sture it will look great in my new kitchen. Can you please tell me what size the drill hole in the countertop needs to be?&nbsp;

Asked by: Sibylle
Hello Sibylle, Thank you for your inquiry! The Delta Trinsic Touch2O Kitchen Pull-Down 9159T-CZ-DST faucet requires a 1 1/4&quot; to 1 1/2&quot; (32 mm to 38 mm) hole size. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20E.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be used in New Zealand on unequal pressure?

Asked by: Linda
Hi Linda, Thank you for your question. Unequal pressure should not affect the operation of the model 9959T-DST faucet. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How do I remove the sprayer assembly for the Delta 9159T-DST so that I can clean out the screen? &nbsp;Does the sprayer assembly just unscrew from the water line?

Asked by: John K
Hello! Thank you for your question! I will be happy to help. Yes, you can simply press the small button on the end of the hose assembly and twist it counterclockwise and remove it from the wand. In order to clean it simply soak the wand assembly in a 50/50 solution of white vinegar and water. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

After replacing the cartridge, I've had a lot of difficulty fitting the cap back on over the rubber band, and not exactly sure how the spring should be positioned. The faucet works but the handle is very stiff and hard to move. How do I fix this?

Asked by: zach26
Hi zach26! Thank you for your question and we are happy to help. The Delta 9159T-DST should have the narrow part of the spring facing towards the handle. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-08-04

The auto feature is great but the batteries last just a few months and we have a IKEA drawer rather than two doors below the sink so access is very difficult. How can we disable the battery operated feature and simple use the faucet manually?

Asked by: Frustrated lady
Hello! Thank you for your question! I will be happy to help. WIth the handle in the on position and the faucet running simply disconnect the cable connected to the battery box. Alternatively we do offer the following A/C adapter which eliminates the need for batteries. https://www.deltafaucet.com/parts-product-detail?modelNumber=EP73954 Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

I have a Trinsic 9159T-DST kitchen faucet. When you turn it on, it makes a grinding noise. Can you tell me what you think is wrong?? Thanks!

Asked by: Donna
Hi Donna! Thank you for your question and we are happy to help. Please send us a direct message or give us a call for further assistance. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

My faucet is now dripping once turned off. How do I stop this dripping problem from occurring. This wastes a lot of water over time. Is there a seal that may be worn out? My faucet is only typo and a half years old. Thank you!

Asked by: Chris 20038
Hi Chris 20038, Thanks so much for contacting Delta Faucet Company about your 9159T-DST! Leaking can be caused by debris not allowing the cartridge to seal properly, we would recommend flushing the faucet and soak the cartridge in a 50/50 solution of white vinegar and water. If the leak continues, the cartridge would need replaced. I have included a link below to the step-by-step instructions on flushing the faucet. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2024, m_12, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_4, bvpage2n
  • co_hasquestionsanswers, tq_223
  • loc_en_US, sid_9159T-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 8ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.