Llave para barra/preparación de alimentos extensible de una manija con tecnología Touch₂O® en cromado

Hello, Thank you for contacting us at Delta Faucet. I apologize about the leaking issue with your faucet but am happy to help. I have reached out to you via email at this time to further assist. Best Regards, Tim

Hello Yeun, Thank you for contacting us. I apologize for the leak when touched off that you are experiencing with your Delta Faucet model 9159T-DST Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology and I am happy to help you. The leak when off you are experiencing appears to be caused by debris within the solenoid assembly. We recommend doing a flush on your electronic components. Please follow the below steps to resolve your drip: 1. Put the handle in the off position. 2. Remove the blue clip that is attached to the top of the solenoid assembly below the sink. 3. Pull the solenoid off of the faucet connection. Remove the debris screen in the top connection if able and clear any debris with tweezers or a q-tip. 4. Set a bucket under the pex supply line that is exposed. 5. Place the handle in the on position and allow it to run water for 2 full minutes. This will clear the supply line out of any debris. 6. Put the handle back into the off position. 7. Reconnect the solenoid to the faucet and clip it back into place. 8. Now remove the bottom clip from the solenoid where the hose connects and pull the hose off. 9. Turn the water back on for an additional 2 minutes to clear the solenoid assembly of any remaining debris. 10. Reconnect the hose and clip it into place again. Once that is finished, turn the water on to the faucet and run it for 15 seconds. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Alan1, Thank you for contacting Delta Faucet Company! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist

Hi Matt, Thank you for your question about the Delta Faucet model 9159T-BL-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! See here to troubleshoot a drip or please reach out for further assistance: https://support.deltafaucet.com/s/article/Touch2O-Drip Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9159T-DST. Please refer to the link below on of the Maintenace and installation sheet in the link below on page 11. The TempSense can be unplugged from the solenoid. https://media.deltafaucet.com/MandI/114376%20Rev%20B.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Jeff, Thank you for your question! We apologize for the leak you are experiencing with your Delta Faucet Trinsic Single Handle Pull-Down Kitchen Faucet With Touch2O Technology In Chrome MODEL: 9159T-DST and will be happy to help you. Leaking is typically caused by debris, which can get caught in a few different areas of the faucet. Please try the following steps, so we can better assist you: 1) First, please unscrew the wand from the hose and turn the faucet on for 4 minutes to flush the lines and see if you get good flow out of the end of the hose. Please check for debris in the wand and re-attach it. Be careful not to let go of the hose with the wand removed, or it may retract into the faucet. 2) Next, turn the handle to the off position, place a bucket under the sink, disconnect the solenoid assembly from the gray PEX tube and check for debris in the screen at the top of the solenoid assembly. If the solenoid assembly is gray, the screen cannot be removed. If it is black, you can use a pair of needle-nose pliers to take the screen out and clean it. 3) Finally, reattach everything and test the flow rate from the wand again. If this does not resolve the issue, please let us know the results of the tests. Please also provide your address, phone number, and email along with the approximate date that the faucet was installed and a photo of the sticker on the solenoid assembly. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Pking, Thanks so much for contacting Delta Faucet Company! The 9159T-DST handle should be straight up then tilt out for cold, and pull forward for hot. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Logical1! Thank you for your question and we are happy to help! There is no removable aerator for the Delta 9159T-DST. Instead, the entire spray head (RP640690 will need to be replaced. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Marc, Thank you for your question about the Delta Faucet model 9159T-BL-DST. Please accept our sincere apology for the inconvenience you are experiencing with the spout magnet. We are happy to help! We recommend replacing the spout magnet and retainer with RP80977. The coating of your magnet may be damaged or defective and will continue to rust. https://www.deltafaucet.com/parts/product/RP80977.html Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Ryan B, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Arctic Stainless MODEL#: 9159T-AR-DST. Here is what we can do to resolve your issue for you. I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below. I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds. Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Next do this again with the hot supply, hook up both hot and cold supply and turn hot and cold valve open fully and equally. Once the faucet has been flushed, you should have flow again. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Robbie, Thank you for reaching out to Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Nan03, Thank you for your question about the Delta Faucet model 9159T-DST. To troubleshoot an issue with the touch function of the faucet, we recommend the video here: https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981 If the issue remains, a replacement solenoid is available as EP92546 for models produced after 01/01/2018. Or as EP74855 for models produced before 01/01/2018. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Price! Thank you for your question and we are happy to help. We recommend flushing the valves of the Delta 9159T-AR-DST. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Good morning Carmah! Thank you for your question! I do apologize that your aerator is damaged we will be happy to help you. This faucet does not have a replaceable aerator. To repair the faucet, you will need to replace the entire sprayer assembly. The part number for that part is an RP64069. Please contact us back for any further questions. Best Regards, Frank

Hello CA66, Thank you for your question. We are happy to help! To match your Delta 9959T-CZ-DST faucet, we offer the kitchen flange and stopper 72030-CZ, kitchen flange and strainer 72010-CZ, and bar/prep sink flange and strainer 72011-CZ. https://www.deltafaucet.com/kitchen/product/72030-CZ.html https://www.deltafaucet.com/kitchen/product/72010-CZ.html https://www.deltafaucet.com/kitchen/product/72011-CZ.html Best regards, Bryan

Hello Will07, Thank you for contacting Delta Faucet Company. I am sorry to hear that your Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Arctic Stainless MODEL#: 9159T-AR-DST is leaking when off, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you! I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below. I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds. Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. If you have not already, please include your date of installation, full name, street address, city, state, zip code, and phone number for our reference. This allows us to more quickly resolve your issue. We appreciate your business and look forward to continuing to serve you. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Thank you for your question, maddiel! Delta Trinsic model 9159T-DST passes all compliance legislation that allows it to be sold and shipped in the state of California. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20G.pdf Best Regards. Benjamin

Hi George, Thanks so much for contacting Delta Faucet Company! The aerator for model 9959T-AR-DST is not available separately, if you are having flow issues we would recommend soaking the wand and flushing the faucet. Please see the link below to the Help Center for further assistance. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello ShuE, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 9159T-CZ-DST has a matching air switch in CZ, part number 72050-CZ. Please see the link below. https://www.deltafaucet.com/kitchen/product/72050-CZ.html Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Denny, Thank you for your question about the Delta Faucet model 9159T-DST Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Chrome. I apologize for not having hot water. I know that can be frustrating. We are happy to help! The issue is likely caused by water debris in the hot water supply or faucet. To flush the faucet, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies. If the issue remains, I recommend replacing the cartridge assembly. See the part diagram for the part number for your date of manufacture. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159T-DST%20Rev%20F.pdf Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Lsiv, Thank you for your question about the Delta Faucet model 9159T-BL-DST Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Matte Black. I am sorry this information was not readily available, and I am happy to help! The matte black finish does not include SpotShield technology for additional resistance to fingerprints. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. https://www.deltafaucet.com/design-innovation/innovations/kitchen/spotshield-technology Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi FBJJ, Thank you for your review of the Delta Faucet TRINSIC® Pull-Down Kitchen Faucet MODEL#: 9159T-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are always happy to assist you. Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance.   It is possible that a flush could resolve this issue. To flush the solenoid: Keep the handle in the off position. Remove the clip that is attached to the braided hose on the bottom of the solenoid. After the hose is removed, place a bucket under the solenoid, and then open the handle. It's helpful to have someone control the handle while the other person is in the cabinet with the bucket. We would also advise flushing the hot and cold lines. 1. Please be sure to turn the water supply off before beginning this process. 2. Move the handle to the full mixed position. 3. Disconnect the faucet supply line from the hot side. 4. Position a bucket with the supply line connection inside the bucket. 5. Turn on the supply stop on the connected supply line side slowly, directing the water from the disconnected side into the bucket. 6. Reconnect the supply line. *Please use caution when flushing the hot water.* You'll want to repeat steps 1-6 for the cold side. Once you've done the flushing, you can turn the water supply back on to the faucet. We appreciate your business and look forward to continuing to serve you. Please contact us directly if you have any further questions.    Best Regards,   Kelley Digital Communications Specialist

Hi Suhail, Thanks so much for contacting Delta Faucet Company! The Magnet Replacement Kit MODEL#: RP80977 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi fredoxx4! Thank you for your question and we are happy to help. You will need to shut off your faucets water supply before repairing the faucet. You will then use a 1/8th allen wrench to remove the handle and then a crescent wrench to remove the bonnet nut. You will then be able to replace the cartridge. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello Customer! Thank you for contacting Delta Faucet Company and we are happy to help. Unfortunately, we are not sure if a portable dishwasher can hook up to the 9159T-DST. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie