Accesorios de ducha y bañera Monitor® serie 14 en Champagne Bronze

Thank you for your question. Delta Faucet model # T14494-SS has one handle and that handle only controls temperature. The volume cannot be controlled. We appreciate you letting us know about the Lowes site and we will get that information changed.

Hello Bwparker1, Thank you for your question. The Delta Linden Tub and Shower models T14493 and T14494 are the exact same units, the difference is the handle styles. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Dear KHooks, Thank you for you question. Based on your description, you will just need to adjust your rotational limit stop to get hotter water from the faucet and for the handle to rotate a little further. I have attached the instructional documents to this Linden 14 Series T14494 model, please look at pages 6-7 module 3 ( Adjusting the Rotational Limit Stop). https://media.deltafaucet.com/MandI/68881%20Rev%20L.pdf Best regards, Tanya

Thank you for your question, Captainzoom! This trim will require a MultiChoice R10000 Rough-In Valve or an existing 1400 Series valve and cartridge. If you have a 1700 Series shower (made prior to February 2006), the valve would first need to be replaced. https://www.deltafaucet.com/search-results?searchTerm=R10000+ Best regards, Jon

Hi FB, Thank you for your question. The set screw on the Linden is underneath the handle at about 6 o-clock, not on the side 3 o-clock as shown on the model in the video. Thanks, Dave

Hi, tkk01! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. If the showerhead leaks out when you have water coming out of the tub spout without the diverter pulled up, the faucet is experiencing Shower Rise. There are a few steps that can be taken to see where the Shower Rise is occurring. 1. Make sure the valve body has the word 'UP' on the top of the body. 2. Between the valve to the tub spout, the measurement should be between 8"-18". Anything less than 8" or more than 18", you will have shower rise occur. 3. There should only be one 90 degree angle (elbow) between the valve down to the tub spout. 4. Between the valve down to the tub spout, make sure you are only using 1/2" copper pipe or 1/2" galvanized pipe. PVC or PEX piping has a smaller inside diameter which pressurizes the water up when it builds up. You can use PVC or PEX piping anywhere else in the install but between the valve down to the tub spout, you should only use 1/2" copper or 1/2" galvanized piping. 5. If these are all installed correctly, the last step we recommend would be to flush the valve body without the cartridge in. Turn off your water at your shut off valve. Take the handle and set screw out. Unscrew the bonnet nut. Pull the cartridge out. Make sure there is nothing left inside of the valve. Turn on the water at the shut off valve for a few seconds to flush the valve of debris. Turn off the water from the shut off valve and reinstall all parts. If you should need anymore assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi, Eric! Thank you for your question. The MultiChoice R10000-PX will work with the Delta T14494 trim kit. Best Regards, Rosanna

Thank you for your question, Andrew. This model does not have a Pause setting. This model includes a single setting (Full Spray) shower head. Best regards, Jon

Thank you for your question, Britt11! The tub spout on model T14494-CZ is non-metallic. Best Regards, Benjamin

Hi Valued Customer, Thank you for contacting Delta Faucet Company! We apologize this information was not readily available to you and we are happy to help! Our T14494-CZ contains both metal and plastic components, however, the finish of our products is what needs to be protected while cleaning! To clean our products, please refer to the instructions below. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean microfiber cloth should help keep your product looking beautiful. To remove water spots, use warm water and a damp microfiber cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturer's instructions for use. Avoid using the following which can damage your finish: · Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy-duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid bleach-based cleaners. · Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric, and/or phosphoric acids and caustic agents. · Avoid harsh abrasives or polishes We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi James27, Thank you for your question. The Delta model T14494-CZ does not include the drain assembly and will need to be purchased separately. Best Regards, Simone

Hello Mom5, Thank you for reaching out to Delta Faucet Company! Our Venetian Bronze finish is a low-gloss, deeply warm finish with subdued highlights. It is brown with copper 'scratches' throughout the finish. Please refer to the link below to find a local showroom. Local showrooms will have our products on display so you can see the finishes and the differences between certain models! https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi, Xman62! Thank you for your question. The Delta T14494-SOS is a Slip-On Spout version. The T14494- spout has an adapter to sweat onto 1/2" copper or thread onto 1/2 IPS. Best regards, Themar

Good afternoon Sumi! Thank you for your question! If your shower is a 1400 series Delta shower, this valve should fit it. The easiest way to tell is by looking at the shower. Does it have one handle or two? If it has one handle, this trim kit will fit on it. Please contact us back for any further questions. Best Regards, Frank

Hello billyluke223, Thank you for your question regarding Delta Faucet T14494! We apologize for any inconvenience you are experiencing, and we will be happy to help! The handle RP70639 can be purchased online or specially ordered at your local hardware store. https://www.deltafaucet.com/where-to-buy We look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hi WillEwings1972, Thank you for your question about the Delta Faucet model T14494-RB. The cartridge included with this tub and shower trim is RP46074. See the parts diagram for more information: https://media.deltafaucet.com/PartsDiagram/DPD-B-T14094_A.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist